IV ADMINISTRATION SETS WITH NEEDLE ACCESS DEVICES

K980994 · Venetec Intl., Inc. · FPA · May 29, 1998 · General Hospital

Device Facts

• Record ID: K980994
• Device Name: IV ADMINISTRATION SETS WITH NEEDLE ACCESS DEVICES
• Applicant: Venetec Intl., Inc.
• Product Code: FPA · General Hospital
• Decision Date: May 29, 1998
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 880.5440
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

An intravascular administration set with needle access to be used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vessel.

Device Story

IV administration set with needle access; facilitates fluid delivery from container to patient vascular system via needle or catheter. Used in clinical settings by healthcare professionals to manage fluid therapy. Device provides conduit for fluid infusion; ensures secure connection between fluid source and patient access site. Benefits include reliable fluid delivery and maintenance of vascular access.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Intravascular administration set with needle access. Materials and specifications not detailed in provided text. Non-electronic, mechanical fluid delivery system.

Indications for Use

Indicated for patients requiring intravenous fluid administration from a container to the vascular system via a needle or catheter.

Regulatory Classification

Identification

An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container.

Special Controls

*Classification.* Class II (special controls). The special control for pharmacy compounding systems within this classification is the FDA guidance document entitled “Class II Special Controls Guidance Document: Pharmacy Compounding Systems; Final Guidance for Industry and FDA Reviewers.” Pharmacy compounding systems classified within the intravascular administration set are exempt from the premarket notification procedures in subpart E of this part and subject to the limitations in § 880.9.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract image of an eagle with three human profiles incorporated into its design.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

MAY 2 9 1998

Ms. Grace Holland · Requlatory Consultant Venetec International, Incorporated 3722 Avenue Sausalito Irvine, California 92606

Re : K980994 IV Extension/Administration Sets with Needle Trade Name: Access Devices Regulatory Class: II Product Code: FPA Dated: March 17, 1998 Received: March 17, 1998

Dear Ms. Holland:

We have reviewed your Section 510 (k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ਸ substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531

{1}------------------------------------------------

Page 2 - Ms. Holland

through 542 of the Act for devices under the Electronic enroduct Radiation Control provisions, or other Federal laws or requlations.

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or [phone] or at its internet address

"http://www.fda.gov/cdrh/dsma/dsmamajn.html".

Sincerely yours,

Timothy A. Ulatowski

Director Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radioloqical Health

Enclosure

{2}------------------------------------------------

Page 1 of 1

510(k) Number (if known): K980994

Device Name: _ IV Administration Sets With Needle Access Devices

Indications For Use:

An intravascular administration set with needle access to be used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vessel.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

| Prescription Use | <span></span> | OR | Over-The-Counter Use | <span></span> |
|----------------------|---------------|----|----------------------|---------------|
| (Per 21 CFR 801.109) | <span></span> | | | <span></span> |

Palutio Accente

(Division Sign-Off)

(Optional Format 1-2-96)

Division of Dental, Infection Control, and General Hospital Devices 510(k) Number_n 980994

Date Of Application - March 17, 1998