HOPE NEBULIZER

K980407 · B&B Medical Technologies, Inc. · CAF · May 27, 1998 · Anesthesiology

Device Facts

Record IDK980407
Device NameHOPE NEBULIZER
ApplicantB&B Medical Technologies, Inc.
Product CodeCAF · Anesthesiology
Decision DateMay 27, 1998
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 868.5630
Device ClassClass 2
AttributesTherapeutic

Intended Use

This device is to be used under medical supervision in hospitals nusring homes, extended care facilities and outpatient clinics. The HOPE nebulizer is a high output nebulizer to be used by loosen nebullzer is a high output heads. It provides additional hudretion to help isoned and diagnostic formulacions. Tre provises and is required. Patient population: secretions for patients whole condition in in issuperior sympathomines, parasympathetic amines, or other appropriate medications would be nebulized. parasympathected annules, or other uppropriate modely via Multigas inlet.

Device Story

HOPE Nebulizer is a high-output nebulizer designed for clinical settings (hospitals, nursing homes, extended care facilities, outpatient clinics). Device operates under medical supervision to deliver aerosolized medications (sympathomimetics, parasympathetic amines, diagnostic formulations) to patients. Input includes gas via a multigas inlet; device transforms this into aerosolized medication output. Primary clinical benefit is providing hydration and loosening secretions to assist patient respiratory condition. Operated by healthcare professionals.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

High-output nebulizer; features multigas inlet for aerosolization. Device is intended for clinical use under medical supervision. No specific materials, software, or connectivity details provided.

Indications for Use

Indicated for patients requiring nebulized medications, including sympathomimetics, parasympathetic amines, or other appropriate diagnostic formulations, to assist in loosening secretions and providing hydration. Used under medical supervision in hospitals, nursing homes, extended care facilities, and outpatient clinics.

Regulatory Classification

Identification

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract symbol that resembles an eagle or bird in flight, composed of three stylized human profiles. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 MAY 2 7 1998 Mr. Stephen W. Briggs B & B Medical Technologies, Inc. P.O. Box 1503 Orangevale, CA 95662 Re: K980407 Hope Nebulizer II (two) Regulatory Class: Product Code: 73 CAF May 15, 1998 Dated: May 18, 1998 Received: Dear Mr. Briggs: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. {1}------------------------------------------------ ## Page 2 - Mr. Stephen W. Briggs This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4648. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, Thomas J. Callahon Thomas J. Callahan, Ph.D. Director Division of Cardiovascular, Respiratory, and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ S10(k) Number (if known): K980407 Device Name: HOPE Nebulizer Indications For Usc. This device is to be used under medical supervision in hospitals nusring homes, extended care facilities and outpatient clinics. The HOPE nusring homes, extended care facilities and outport accorpolized medications nebulizer is a high output nebulizer to be used by loosen nebullzer is a high output heads. It provides additional hudretion to help isoned and diagnostic formulacions. Tre provises and is required. Patient population: secretions for patients whole condition in in issuperior sympathomines, parasympathetic amines, or other appropriate medications would be nebulized. parasympathected annules, or other uppropriate modely via Multigas inlet. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) M. Pui (Division Sign-Off) Division of Cardiovascular, Respiratory, and Neurological Devices 510(k) Number Prescription Usc ਮ (Pcr 21 CFR 801.109) OR . Over-The-Counter Use (Optional Formal 1-2-96)
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...