DENTAL TRAY, STERILE, DISPOSABLE

K974238 · Trinity Laboratories, Inc. · EIA · Feb 4, 1998 · Dental

Device Facts

• Record ID: K974238
• Device Name: DENTAL TRAY, STERILE, DISPOSABLE
• Applicant: Trinity Laboratories, Inc.
• Product Code: EIA · Dental
• Decision Date: Feb 4, 1998
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.6640
• Device Class: Class 1

Intended Use

Trinity's Dental Tray is a sterile prepackaged disposable unit. It contains the gowns, table cover, mayo stand cover, OR towels, bowl, medicine cup, sponges, scalpels, tongue depressor, foam tray, Yankauer, suction tubing, and towels necessary for the performance of basic dental procedures, including but not limited to general cleaning, cavity filling, root canal, and tooth removal.

Device Story

Dental Tray is a sterile, prepackaged, disposable kit containing instruments and supplies for dental procedures. Contents include gowns, table/mayo stand covers, towels, bowl, medicine cup, sponges, scalpels, tongue depressor, foam tray, Yankauer, and suction tubing. Used in dental clinics by dental professionals to facilitate basic procedures like cleaning, fillings, root canals, and extractions. Provides a convenient, ready-to-use set of sterile supplies to support clinical workflow and maintain aseptic conditions during patient care.

Clinical Evidence

Bench testing only; no clinical data provided.

Technological Characteristics

Sterile, disposable kit containing various dental instruments and supplies. No complex electronics, software, or active energy sources. Materials are standard medical-grade components for dental use. Sterilization is implied by the 'sterile' designation.

Indications for Use

Indicated for use by dental professionals during basic dental procedures, including general cleaning, cavity filling, root canal, and tooth removal.

Regulatory Classification

Identification

A dental operative unit and accessories is an AC-powered device that is intended to supply power to and serve as a base for other dental devices, such as a dental handpiece, a dental operating light, an air or water syringe unit, and oral cavity evacuator, a suction operative unit, and other dental devices and accessories. The device may be attached to a dental chair.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the Department of Health & Human Services - USA. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around it. Inside the circle is a stylized image of an eagle with its wings spread, facing to the right.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

## FEB 4 1998

Mr. Partha Basumallik Vice President Trinity Laboratories, Incorporated 201 Kiley Drive Salisbury, Maryland 21801

K974238 Re : Dental Tray, Sterile, Disposable Trade Name: Requlatory Class: I Product Code: EIA Dated: November 5, 1997 Received: November 12, 1997

Dear Mr. Basumallik:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual reqistration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in requlatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531

{1}------------------------------------------------

Page 2 - Mr. Basumallik

through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or requlations.

This letter will allow you to beqin marketing your device as described in your 510 (k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to
premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or [phone] or at its internet address "http://www.fpa.gov/cdrh/dsmamain.html".

Sincerely yours

Timothy A Ulatowski

Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

Page _1_ Of _ 1_

510 (k) Number (if Known):

Device Name: Dental Tray

Indications for Use:

Trinity's Dental Tray is a sterile prepackaged disposable unit. It contains the gowns, table cover, mayo stand cover, OR towels, bowl, medicine cup, sponges, scalpels, tongue depressor, foam tray, Yankauer, suction tubing, and towels necessary for the performance of basic dental procedures, including but not limited to general cleaning, cavity filling, root canal, and tooth removal.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Prescription Use __ ﮯ (Per 21 CFR 801.109)

OR

Over-the-Counter Use _

(Optional Format 1-2-96)

SWAAN RUMPE
(Division Sign-Off)

Division of Dental, Infection Control, and General Hospital Devices 11.7 510(k) Number