MAJOR BASIN TRAY

K912104 · Medical Device Inspection Co., Inc. · FSM · Aug 9, 1991 · General, Plastic Surgery

Device Facts

Record IDK912104
Device NameMAJOR BASIN TRAY
ApplicantMedical Device Inspection Co., Inc.
Product CodeFSM · General, Plastic Surgery
Decision DateAug 9, 1991
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 878.4800
Device ClassClass 1

Device Story

Major Basin Tray consists of a collection of manual surgical instruments for general use. Device functions as a kit/tray containing multiple components. Used in clinical settings by healthcare professionals. User must ensure all individual components are either pre-amendment devices or have received prior 510(k) clearance. Device facilitates surgical procedures by organizing necessary instruments.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Manual surgical instrument kit. Class I device under 21 CFR 878.4800 (Product Code FSM).

Regulatory Classification

Identification

A manual surgical instrument for general use is a nonpowered, hand-held, or hand manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892 of this chapter.

Submission Summary (Full Text)

{1} ![LOGO](FDA U.S. FOOD & DRUG ADMINISTRATION) April 2, 2024 Medical Device Inspection Co., Inc. Alan P. Schwartz President 55 Northern Blvd. Suite 301 Great Neck, New York 11021 Re: K912104 Trade/Device Name: Major Basin Tray Regulation Number: 21 CFR 878.4800 Regulation Name: Manual surgical instrument for general use Regulatory Class: Class I Product Code: FSM Dear Alan P. Schwartz: The Food and Drug Administration (FDA) is sending this letter to notify you of an administrative change related to your previous substantial equivalence (SE) determination letter dated August 9, 1991. Specifically, FDA is updating this SE Letter because FDA has better categorized your device technology under product code FSM. Please note that the 510(k) submission was not re-reviewed. For questions regarding this letter please contact Yu-Chieh Chiu, OHT4: Office of Surgical and Infection Control Devices, 301-796-6196, yu-chieh.chiu@fda.hhs.gov. Sincerely, Yu-chieh Chiu -S Yu-Chieh Chiu, Ph.D. Assistant Director DHT4B: Division of Infection Control and Plastic Surgery Devices OHT4: Office of Surgical and Infection Control Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health U.S. Food & Drug Administration 10903 New Hampshire Avenue Silver Spring, MD 20993 www.fda.gov {2} DEPARTMENT OF HEALTH & HUMAN SERVICES Public Health Service Food and Drug Administration 1390 Piccard Drive Rockville MD 20850 AUG - 9 1991 Mr. Alan P. Schwartz President Medical Device Inspection Co., Inc. 55 Northern Blvd. Suite 301 Great Neck, New York 11021 Re: K912104 Major Basin Tray Regulatory Class: Class I Dated: May 9, 1991 Received: May 13, 1991 Dear Mr. Schwartz: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments. You may, therefore, market the devices, subject to the general controls provisions of the Federal Food, Drug, and Cosmetic Act (Act). However, you are responsible to determine that the medical devices you use as components in the Major Basin Tray have either been determined as substantially equivalent under the premarket notification process (Section 510(k) of the Act), or were on the market prior to May 28, 1976, the enactment date of the Medical Device Amendments. Please note: If you purchase your device components in bulk (unfinished) and further process (e.g. sterilize), you must submit a new 510(k) before including these components in your kit/tray. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, and labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval) it may be subject to such additional controls. Existing major regulations affecting your devices can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. In addition, the Food and Drug Administration (FDA) may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under the Radiation Control for Health and Safety Act of 1968, or other Federal Laws or Regulations. BEST COPY AVAILABLE / {3} Page 2 - Mr. Alan P. Schwartz An FDA finding of substantial equivalence of your device to a pre-amendments device results in a classification for your device and permits your device to proceed to the market, but it does not mean that FDA approves your device. Therefore, you may not promote or in any way represent your devices or their labeling as being approved by FDA. If you desire specific advice on the labeling for your devices please contact the Division of Compliance Operations, Regulatory Guidance Branch (HFZ-323) at (301) 427-1116. Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at their toll free number (800) 638-2041 or at (301) 443-6597. Sincerely yours, David L. West David L. West, Ph.D. Deputy Director Office of Device Evaluation Center for Devices and Radiological Health BEST COPY AVAILABLE 2
Innolitics
Guidance Recalls

Panel 1

/
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...