ArthroTAK Tendon Anchor Kit
Device Facts
| Record ID | K262809 |
|---|---|
| Device Name | ArthroTAK Tendon Anchor Kit |
| Applicant | ArthroTAK, LLC |
| Product Code | MBI · Orthopedic |
| Decision Date | Sep 2, 2026 |
| Decision | SESE |
| Submission Type | Special |
| Regulation | 21 CFR 888.3040 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Indications for Use
The ArthroTAK Tendon Anchor Kit is intended to be used for soft-tissue to bone fixation in the shoulder, foot/ankle, knee, hand/wrist, and elbow in the following procedures: - Shoulder: Rotator Cuff Repair, Bankart Repair, SLAP Lesion Repair, Biceps Tenodesis, Acromio-Clavicular Separation Repair, Deltoid Repair, Capsular Shift or Capsulolabral Reconstruction. -Foot/Ankle: Lateral Stabilization, Medial Stabilization, Hallux Valgus Reconstruction, Mid-foot Reconstruction, Metatarsal Ligament Repair/Tendon Repair and Bunionectomy. -Knee: Medial Collateral Ligament Repair, Lateral Collateral Ligament Repair, Patellar Tendon Repair, Posterior Oblique Ligament Repair, and Iliotibial Band Tenodesis. -Hand/Wrist: Scapholunate Ligament Reconstruction, Ulnar or Radial Collateral Ligament Reconstruction. -Elbow: Biceps Tendon Reattachment, Tennis Elbow Repair, Ulnar or Radial Collateral Ligament Reconstruction, Lateral Epicondylitis repair.
Device Story
ArthroTAK Tendon Anchor Kit consists of PEEK anchor (proximal tack and distal bullet) and inserter; used for soft-tissue to bone fixation. Inserter comes pre-loaded with implant; optional single-use bone punch creates pilot holes in hard bone. Device used by surgeons in clinical settings for orthopedic repairs (shoulder, foot/ankle, knee, hand/wrist, elbow). Implant secures soft tissue to bone to facilitate healing. Device is mechanically operated; no software or electronic components.
Clinical Evidence
Bench testing only. Testing included insertion, pullout, and cyclic fatigue/pull-to-failure performed in accordance with ASTM F3690-24 and methods cleared under K252635.
Technological Characteristics
Material: Poly-ether-etherketone (PEEK). Components: Proximal tack and distal bullet. Principle: Mechanical bone fixation fastener. Testing standard: ASTM F3690-24. No software or energy source.
Indications for Use
Indicated for adult patients requiring soft-tissue to bone fixation in the shoulder, foot/ankle, knee, hand/wrist, and elbow for various orthopedic repair and reconstruction procedures.
Regulatory Classification
Identification
A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.
Predicate Devices
Submission Summary (Full Text)
{0}
**U.S. FOOD & DRUG**
ADMINISTRATION
September 2, 2026
ArthroTAK, LLC
% Ken Riordan
Owner and Principal Consultant
Greenfield Consulting, LLC
1709 Crestwood Rd.
West Bend, Wisconsin 53095
Re: K262809
Trade/Device Name: ArthroTAK Tendon Anchor Kit
Regulation Number: 21 CFR 888.3040
Regulation Name: Smooth Or Threaded Metallic Bone Fixation Fastener
Regulatory Class: Class II
Product Code: MBI
Dated: August 7, 2026
Received: August 7, 2026
Dear Ken Riordan:
We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
U.S. Food & Drug Administration
10903 New Hampshire Avenue
Silver Spring, MD 20993
www.fda.gov
{1}
K262809 - Ken Riordan
Page 2
Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download).
Your device is also subject to, among other requirements, the Quality Management System Regulation (QMSR) (21 CFR Part 820), which includes, but is not limited to, ISO 13485 clause 7.3 (Design controls), ISO 13485 clause 8.3 (Nonconforming product), ISO 13485 clause 8.5.2 (Corrective action), and ISO 13485 clause 8.5.3 (Preventative action). Please note that regardless of whether a change requires premarket review, the QMSR requires device manufacturers to review and approve changes to device design and production (ISO 13485 clause 7.3 and ISO 13485 clause 7.5) and document changes and approvals in the Medical Device File (ISO 13485 clause 4.2.3).
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR Part 803) for devices or postmarketing safety reporting (21 CFR Part 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reporting-combination-products); good manufacturing practice requirements as set forth in the Quality Management System Regulation (QMSR) (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR Part 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR Parts 1000-1050.
All medical devices, including Class I and unclassified devices and combination product device constituent parts are required to be in compliance with the final Unique Device Identification System rule ("UDI Rule"). The UDI Rule requires, among other things, that a device bear a unique device identifier (UDI) on its label and package (21 CFR 801.20(a)) unless an exception or alternative applies (21 CFR 801.20(b)) and that the dates on the device label be formatted in accordance with 21 CFR 801.18. The UDI Rule (21 CFR 830.300(a) and 830.320(b)) also requires that certain information be submitted to the Global Unique Device Identification Database (GUDID) (21 CFR Part 830 Subpart E). For additional information on these requirements, please see the UDI System webpage at https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/unique-device-identification-system-udi-system.
Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-devices/medical-device-safety/medical-device-reporting-mdr-how-report-medical-device-problems.
For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-
{2}
K262809 - Ken Riordan
Page 3
assistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100).
Sincerely,
**Thomas Mcnamara -S**
For: Christopher Ferreira, M.S.
Assistant Director
DHT6C: Division of Restorative,
Repair, and Trauma Devices
OHT6: Office of Orthopedic Devices
Office of Product Evaluation and Quality
Center for Devices and Radiological Health
Enclosure
{3}
| Indications for Use | | |
| --- | --- | --- |
| Please type in the marketing application/submission number, if it is known. This textbox will be left blank for original applications/submissions. | K262809 | ? |
| Please provide the device trade name(s). | | ? |
| ArthroTAK Tendon Anchor Kit | | |
| Please provide your Indications for Use below. | | ? |
| The ArthroTAK Tendon Anchor Kit is intended to be used for soft-tissue to bone fixation in the shoulder, foot/ankle, knee, hand/wrist, and elbow in the following procedures: - Shoulder: Rotator Cuff Repair, Bankart Repair, SLAP Lesion Repair, Biceps Tenodesis, Acromio-Clavicular Separation Repair, Deltoid Repair, Capsular Shift or Capsulolabral Reconstruction. -Foot/Ankle: Lateral Stabilization, Medial Stabilization, Hallux Valgus Reconstruction, Mid-foot Reconstruction, Metatarsal Ligament Repair/Tendon Repair and Bunionectomy. -Knee: Medial Collateral Ligament Repair, Lateral Collateral Ligament Repair, Patellar Tendon Repair, Posterior Oblique Ligament Repair, and Iliotibial Band Tenodesis. -Hand/Wrist: Scapholunate Ligament Reconstruction, Ulnar or Radial Collateral Ligament Reconstruction. -Elbow: Biceps Tendon Reattachment, Tennis Elbow Repair, Ulnar or Radial Collateral Ligament Reconstruction, Lateral Epicondylitis repair. | | |
| Please select the types of uses (select one or both, as applicable). | ☑ Prescription Use (21 CFR 801 Subpart D) ☐ Over-The-Counter Use (21 CFR 801 Subpart C) | ? |
| Please select the age group(s) for which the device(s) is to be used. | ☐ Neonates/Newborns (Birth to < 29 days old) ☐ Infants (29 days old to < 2 years old) ☐ Children (2 years old to < 12 years old) ☐ Adolescents (12 years old to < 22 years old) ☑ Adults (22 years old and greater) | ? |
{4}
510(k) #:
# 510(k) Summary
Prepared on: 2026-08-27
Contact Details
21 CFR 807.92(a)(1)
| Applicant Name | ArthroTAK, LLC |
| --- | --- |
| Applicant Address | 2925 Stockyard Rd Suite B Missoula MT 59808 United States |
| Applicant Contact Telephone | 5742531133 |
| Applicant Contact | Mr. Don Running |
| Applicant Contact Email | don.running@exodusnewventures.com |
| Correspondent Name | Greenfield Consulting, LLC |
| Correspondent Address | 1709 Crestwood Rd West Bend WI 53095 United States |
| Correspondent Contact Telephone | 8153883058 |
| Correspondent Contact | Mr. Ken Riordan |
| Correspondent Contact Email | kenneth.riordan@outlook.com |
Device Name
21 CFR 807.92(a)(2)
| Device Trade Name | ArthroTAK tendon Anchor Kit |
| --- | --- |
| Common Name | Smooth or threaded metallic bone fixation fastener |
| Classification Name | Fastener, Fixation, Nondegradable, Soft Tissue |
| Regulation Number | 888.3040 |
| Product Code(s) | MBI |
Legally Marketed Predicate Devices
21 CFR 807.92(a)(3)
| Predicate # | Predicate Trade Name (Primary Predicate is listed first) | Product Code |
| --- | --- | --- |
| K252635 | ArthroTAK Tendon Anchor Kit | MBI |
| K101823 | Arthrex SwiveLock Anchors | MAI |
Device Description Summary
21 CFR 807.92(a)(4)
The ArthroTAK Tendon Anchor Kit consists of an ArthroTAK implant and inserter. The ArthroTAK implant is a poly-ether-etherketone (PEEK) anchor comprised of two components, a proximal tack and distal bullet. The ArthroTAK inserter comes pre-loaded with the ArthroTAK implant and is designed to enable insertion of the ArthroTAK implant into the bone. A single-use bone punch is available and can be used to create a pilot hole for insertion in hard bone.
Intended Use/Indications for Use
21 CFR 807.92(a)(5)
{5}
The ArthroTAK Tendon Anchor Kit is intended to be used for soft-tissue to bone fixation in the shoulder, foot/ankle, knee, hand/wrist, and elbow in the following procedures:
- Shoulder: Rotator Cuff Repair, Bankart Repair, SLAP Lesion Repair, Biceps Tenodesis, Acromio-Clavicular Separation Repair, Deltoid Repair, Capsular Shift or Capsulolabral Reconstruction.
-Foot/Ankle: Lateral Stabilization, Medial Stabilization, Hallux Valgus Reconstruction, Mid-foot Reconstruction, Metatarsal Ligament Repair/Tendon Repair and Bunionectomy.
-Knee: Medial Collateral Ligament Repair, Lateral Collateral Ligament Repair, Patellar Tendon Repair, Posterior Oblique Ligament Repair, and Iliotibial Band Tenodesis.
-Hand/Wrist: Scapholunate Ligament Reconstruction, Ulnar or Radial Collateral Ligament Reconstruction.
-Elbow: Biceps Tendon Reattachment, Tennis Elbow Repair, Ulnar or Radial Collateral Ligament Reconstruction, Lateral Epicondylitis repair.
## Indications for Use Comparison
21 CFR 807.92(a)(5)
The ArthroTAK device is proposing to expand the indications for use to additional anatomical locations, including the knee, foot & ankle, hand & wrist, and elbow, as well as expanding indications in the shoulder. The proposed indications for use are in-line with the clinical applications of similar bone anchors currently cleared and marketed, including the reference device, K101823.
## Technological Comparison
21 CFR 807.92(a)(6)
The device has identical technological characteristics, including design, material, chemical composition, and principle of operation as the predicate device.
## Non-Clinical and/or Clinical Tests Summary & Conclusions
21 CFR 807.92(b)
In support of a substantial equivalence determination, the following design verification testing was performed in accordance with ASTM F3690-24:
- Insertion Testing
- Pullout Testing
- Cyclic Fatigue & Pull-to-Failure
The testing was performed using the same test methods submitted and cleared under the ArthroTAK Tendon Anchor Kit, K252635 or in accordance with FDA recognized standards.
The ArthroTAK Tendon Anchor Kit is identical to the predicate in design, materials, manufacturing, sterilization, packaging, operating principles, and intended use. The proposed indications do not raise new questions of safety or effectiveness, and the subject device is substantially equivalent to the predicate device.
