Who is the manufacturer of TEMP MASTER, PMMA-based dental resin?

Taiwan Dental Materials Co., Ltd. filed the 510(k) submission for TEMP MASTER, PMMA-based dental resin (K243951).

What is the FDA product code for TEMP MASTER, PMMA-based dental resin?

EBG. It is classified under 21 CFR 872.3770 as a Class 2 device in the Dental panel.

What is the regulatory pathway for TEMP MASTER, PMMA-based dental resin?

510(k) clearance (submission type: Traditional).

Who can help prepare an FDA 510(k) submission like TEMP MASTER, PMMA-based dental resin?

Innolitics — a medical-device software consultancy — provides regulatory and engineering support for FDA 510(k) submissions. See https://innolitics.com/services/510ks/ or contact https://innolitics.com/contact.

TEMP MASTER, PMMA-based dental resin

K243951 · Taiwan Dental Materials Co., Ltd. · EBG · Feb 21, 2025 · Dental

Device Facts

Record ID	K243951
Device Name	TEMP MASTER, PMMA-based dental resin
Applicant	Taiwan Dental Materials Co., Ltd.
Product Code	EBG · Dental
Decision Date	Feb 21, 2025
Decision	SESE
Submission Type	Traditional
Regulation	21 CFR 872.3770
Device Class	Class 2
Attributes	Therapeutic

Intended Use

TEMP MASTER, PMMA-based dental resin developed by Taiwan Dental Materials CO., LTD. is a self-cured resin indicated for the fabrication of short-term restorations including temporary inlays, crowns, and bridges, which can protect or restore damaged teeth while permanent restorations are being prepared. It is a traditional auto-cured PMMA-based resin composed of powder and liguid. Polymerization occurs when the powder and liguid are mixed at room temperature.

Device Story

TEMP MASTER is a self-curing (auto-polymerizing) PMMA-based dental resin consisting of powder and liquid components. Used by dental professionals in a clinical setting to fabricate temporary inlays, crowns, and bridges. Polymerization occurs at room temperature upon mixing the two components. The device protects or restores damaged teeth while permanent restorations are being prepared. It functions as a temporary restorative material; clinical benefit is the maintenance of tooth function and protection during the interim period before final restoration placement.

Clinical Evidence

Bench testing only. Performance evaluated per ISO 10477 (flexural strength, water sorption, water solubility) and biocompatibility per ISO 10993. Results demonstrate compliance with standards and performance comparable to the predicate device.

Technological Characteristics

Self-curing PMMA-based acrylic resin (Type 1 per ISO 10477). Two-component system (powder/liquid). Polymerization via room-temperature chemical reaction. Flexural strength >50 MPa. Non-sterile.

Indications for Use

Indicated for fabrication of short-term dental restorations (inlays, crowns, bridges) to protect or restore damaged teeth during preparation of permanent restorations.

Regulatory Classification

Identification

A temporary crown and bridge resin is a device composed of a material, such as polymethylmethacrylate, intended to make a temporary prosthesis, such as a crown or bridge, for use until a permanent restoration is fabricated.

Predicate Devices

Unifast III (K073106)

Related Devices

K082700 — TEMPORARY COLD.V AND SELF-CURE DENTINE · Major Prodotti Dentari S.P.A. · Dec 9, 2008
K251271 — TempFIT Temporary Crown and Bridge Resin · Rizhao Huge Biomaterials Company, Ltd. · Jun 23, 2025
K060293 — TEMPORARY CROWN AND BRIDGE MATERIAL · Dentsply International, Inc. · Feb 17, 2006
K110484 — SELF CURE TEMPORARY CROWN AND BRIDGE MATERIAL · Novocol, Inc. · May 17, 2011
K994012 — TEMPOFIT, MODEL 02693 · Detax GmbH & Co. KG · Feb 16, 2000

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/0 description: The image shows the logo of the U.S. Food and Drug Administration (FDA). On the left is the Department of Health & Human Services logo. To the right of that is the FDA logo, which is a blue square with the letters "FDA" in white. To the right of the blue square is the text "U.S. FOOD & DRUG ADMINISTRATION" in blue. February 21, 2025 Taiwan Dental Materials CO., LTD. Pey-Fen Tang Senior R&D Engineer 11F., No. 136, Sec. 3, Zhongxiao E. Rd., Da'an Dist. Taipei, 106671 TAIWAN Re: K243951 Trade/Device Name: TEMP MASTER, PMMA-based dental resin Regulation Number: 21 CFR 872.3770 Regulation Name: Temporary Crown And Bridge Resin Regulatory Class: Class II Product Code: EBG Dated: December 23, 2024 Received: December 23, 2024 Dear Pey-Fen Tang: We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {1}------------------------------------------------ Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download). Your device is also subject to, among other requirements, the Quality System (QS) regulation (21 CFR Part 820), which includes, but is not limited to, 21 CFR 820.30. Design controls; 21 CFR 820.90. Nonconforming product; and 21 CFR 820.100, Corrective and preventive action. Please note that regardless of whether a change requires premarket review, the QS regulation requires device manufacturers to review and approve changes to device design and production (21 CFR 820.30 and 21 CFR 820.70) and document changes and approvals in the device master record (21 CFR 820.181). Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR Part 803) for devices or postmarketing safety reporting (21 CFR Part 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reportingcombination-products); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR Part 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR Parts 1000-1050. All medical devices, including Class I and unclassified devices and combination product device constituent parts are required to be in compliance with the final Unique Device Identification System rule ("UDI Rule"). The UDI Rule requires, among other things, that a device bear a unique device identifier (UDI) on its label and package (21 CFR 801.20(a)) unless an exception or alternative applies (21 CFR 801.20(b)) and that the dates on the device label be formatted in accordance with 21 CFR 801.18. The UDI Rule (21 CFR 830.300(a) and 830.320(b)) also requires that certain information be submitted to the Global Unique Device Identification Database (GUDID) (21 CFR Part 830 Subpart E). For additional information on these requirements, please see the UDI System webpage at https://www.fda.gov/medical-device-advicecomprehensive-regulatory-assistance/unique-device-identification-system-udi-system. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-device-safety/medical-device-reportingmdr-how-report-medical-device-problems. For comprehensive regulatory information about mediation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medicaldevices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-device-advice-comprehensive-regulatory {2}------------------------------------------------ assistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100). Sincerely, ## MICHAEL E. ADJODHA -S Michael E. Adjodha, MChE, RAC, CQIA Assistant Director DHT1B: Division of Dental and ENT Devices OHT1: Office of Ophthalmic, Anesthesia, Respiratory, ENT, and Dental Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ #### Indications for Use Submission Number (if known) K243951 Device Name TEMP MASTER, PMMA-based dental resin Indications for Use (Describe) TEMP MASTER, PMMA-based dental resin developed by Taiwan Dental Materials CO., LTD. is a self-cured resin indicated for the fabrication of short-term restorations including temporary inlays, crowns, and bridges, which can protect or restore damaged teeth while permanent restorations are being prepared. It is a traditional auto-cured PMMA-based resin composed of powder and liguid. Polymerization occurs when the powder and liguid are mixed at room temperature. Type of Use (Select one or both, as applicable) Prescription Use (Part 21 CFR 801 Subpart D) Over-The-Counter Use (21 CFR 801 Subpart C) #### CONTINUE ON A SEPARATE PAGE IF NEEDED. This section applies only to requirements of the Paperwork Reduction Act of 1995. #### *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.* The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to: > Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff(@fda.hhs.gov "An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number." {4}------------------------------------------------ # 510(k) Summary # [TEMP MASTER, PMMA-based dental resin] [2024/08/15] {5}------------------------------------------------ ### K243951 510(k) SUMMARY ### [TEMP MASTER, PMMA-based dental resin] #### 1. Contact Person Company name: Taiwan Dental Materials CO., LTD. Name: Pey Fen, Tang Title: Senior R&D Engineer E-mail: tangzs012304@gmail.com Office address: 7F., No. 161, Sec. 1, Jianguo S. Rd., Da'an Dist., Taipei City 106084, Taiwan (R.O.C.) Tel: (O) +886 2 8772 4023 #### 2. Device Name and Classification | Product Name: | TEMP MASTER, PMMA-based dental resin | |-----------------------|--------------------------------------| | Classification Name: | Temporary crown and bridge resin. | | Common or Usual Name: | Dental Material | | Classification Panel: | Dental Device | | Regulation Number: | 872.3770 | | Device Class: | Class 2 | | Product Code: | EBG | #### 3. Predicate Device(s) | Product Name: | K073106 Unifast III | |-----------------------|-----------------------------------------------------------------------------------| | Classification Name: | Denture Relining Repairing or Rebasing Resin Temporary crown and bridge resin. | | Common or Usual Name: | Dental Material | | Classification Panel: | Dental Device | | Regulation Number: | 872.3760, 872.3770 | | Device Class: | Class 2 | | Product Code: | EBI, EBG | {6}------------------------------------------------ #### 4. Device Description TEMP MASTER, PMMA-based dental resin, is a self-curing (cold-cure) material designed to fabricate temporary crowns and bridges. It consists of two components: powder and liquid. Polymerization occurs when the powder and liquid are mixed at room temperature. Classified as a Type 1 (autopolymerizable) acrylic resin according to ISO 10477 standards, TEMP MASTER, PMMA-based dental resin provides reliable performance for temporary restorations. #### 5. Indications for Use TEMP MASTER, PMMA-based dental resin developed by Taiwan Dental Materials CO., LTD., is a self-cured resin indicated for the fabrication of shortterm restorations including temporary inlays, crowns, and bridges, which can protect or restore damaged teeth while permanent restorations are being prepared. It is a traditional auto-cured PMMA-based resin composed of powder and liquid. Polymerization occurs when the powder and liquid are mixed at room temperature. #### 6. Substantial Equivalence TEMP MASTER, PMMA-based dental resin, developed by Taiwan Dental Materials, is substantially equivalent to the predicate device, Unifast III (K073106). The subject device, TEMP MASTER, PMMA-based dental resin and the predicate device, Unifast III (K073106), are both indicated for the fabrication of temporary inlays, crowns, and bridges. However, the predicate device also includes an additional indication for the repair of fractured dentures, which is not included in the indications for the subject device. The substantially equivalent comparison focuses on the indications and properties under the product code EBG (Crown and Bridge, Temporary, Resin). The results of this comparison demonstrate that TEMP MASTER, PMMA-based dental resin is substantially equivalent to the predicate device, Unifast III (K073106). The expanded indication of the predicate device is not relevant to the substantial equivalence determination in this document. {7}------------------------------------------------ | Device Description | | | | |--------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Specifications | Subject Device TEMP MASTER, PMMA-based dental resin | Predicate Device Unifast III | Differences | | K number | NA | K073106 | NA | | Classification Product code | EBG | EBI, EBG | | | Regulation no. | 872.3770 | 872.3770, 872.3760 | | | Indications for use | TEMP MASTER, PMMA-based dental resin is a self-cured resin indicated for the fabrication of short-term restorations including temporary inlays, crowns, and bridges, which can protect or restore damaged teeth while permanent restorations are being prepared. It is a traditional auto-cured PMMA-based resin composed of powder and liquid. Polymerization occurs when the powder and liquid are mixed at room temperature. | Unifast III is a self- curing acrylic resin used for a variety of dental applications, including construction of temporary inlays, crowns and bridges and repair of fractured dentures in either pressure or paint on techniques. | The predicate device also includes an additional indication for the repair of fractured dentures, which is not included in the indications for the subject device. The comparison only focuses on the properties under the product code EBG (Crown and Bridge, Temporary, Resin). | | Acrylic Resin | self-curing Resin | self-curing Resin | Identical | | Chemical Characterization | PMMA-based resin | PMMA-based resin | Identical | Table 1 The substantially equivalent comparison | Physical Properties | | | | | |---------------------|-----------------------------------------------------------|--------------------------------------------|--|--| | ISO 10477 | Subject Device TEMP MASTER, PMMA-based dental resin | Predicate Device Unifast III K073106 | | | | Flexural Strength | >50 MPa | >50 MPa | | | | Water Absorption | Complies with ISO 10477 | Complies with ISO 10477 | | | | Water Solubility | Complies with ISO 10477 | Complies with ISO 10477 | | | {8}------------------------------------------------ #### 7. Performance Data #### Biocompatibility Testing The biocompatibility evaluation for TEMP MASTER, PMMA-based dental resin was conducted in accordance with the FDA Blue Book Memorandum #G95 and international Standard ISO 10993. #### Bench Testing ISO 10477. Dentistry-Polymer-based crown and bridge materials. 2018. -The nonclinical tests conducted in accordance with ISO 10477 assessed the flexural strength, water sorption, and water solubility of the temporary crown and bridge dental resin. The performance characteristics of TEMP MASTER, PMMA-based dental resin, were compared to those of the predicate device, and both materials demonstrated results within the acceptable ranges defined by the standard. #### Sterility and Shelf-life The device is provided non- sterile. From the shelf-life testing, TEMP MASTER, PMMA-based dental resin has a shelf life of 2.5 years. The shelf testing has been conducted with the bench test fromthe ISO Standard 10477 and ISO 868. #### 8. Similarity and differences TEMP MASTER, PMMA-based dental resin is similar to the predicate device in the method of processing. The main difference is the slight differences in the percentage of chemical composition. The chemical composition might influence the biocompatibility of TEMP MASTER, as well as its performance (mechanical properties). Thus, both biocompatibility and performance has been demonstrated for TEMP MASTER. The same tests according to the same standards ISO 10993 and ISO 10477 were used to show biocompatibility and performance of the predicate. #### 9. Conclusion After analyzing bench test, device description and intended use/ indication for use, it can be concluded that TEMP MASTER, PMMA-based dental resin is as safe and effective as the predicate device, Unifast III (K073106).