Who is the manufacturer of Pinnacle Duofix HA Acetabular Cup Prosthesis?

DePuy Orthopaedics, Inc. filed the 510(k) submission for Pinnacle Duofix HA Acetabular Cup Prosthesis (K192919).

What is the FDA product code for Pinnacle Duofix HA Acetabular Cup Prosthesis?

LPH. It is classified under 21 CFR 888.3358 as a Class 2 device in the Orthopedic panel.

What is the regulatory pathway for Pinnacle Duofix HA Acetabular Cup Prosthesis?

510(k) clearance (submission type: Special).

What are the predicate devices for Pinnacle Duofix HA Acetabular Cup Prosthesis?

Pinnacle Duofix HA Acetabular Cup Prosthesis (K000306); Pinnacle Duofix HA Acetabular Cup Prosthesis (K031495).

Who can help prepare an FDA 510(k) submission like Pinnacle Duofix HA Acetabular Cup Prosthesis?

Innolitics — a medical-device software consultancy — provides regulatory and engineering support for FDA 510(k) submissions. See https://innolitics.com/services/510ks/ or contact https://innolitics.com/contact.

Pinnacle Duofix HA Acetabular Cup Prosthesis

K192919 · DePuy Orthopaedics, Inc. · LPH · Nov 26, 2019 · Orthopedic

Device Facts

Record ID	K192919
Device Name	Pinnacle Duofix HA Acetabular Cup Prosthesis
Applicant	DePuy Orthopaedics, Inc.
Product Code	LPH · Orthopedic
Decision Date	Nov 26, 2019
Decision	SESE
Submission Type	Special
Regulation	21 CFR 888.3358
Device Class	Class 2
Attributes	Therapeutic

Intended Use

The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for use in total hip replacement procedures for patients suffering severe pain and disability due to structural damage in the hip joint from rheumatoid arthritis, osteoarthritis, post-traumatic arthritis, collagen disorders, avascular necrosis, and nonunion of femoral fractures. Use of the prosthesis is also indicated for revision of the previous hip arthroplasty and for patients with congenital hip dysplasia, protrusio acetabuli, slipped capital femoral epiphysis and disability due to previous fusion, where bone stock is inadequate for other reconstruction techniques. The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for cementless application.

Device Story

Sintered, porous-coated (Porocoat) hemispherical acetabular shell; titanium alloy (Ti-6Al-4V) construction; hydroxyapatite (HA) coating. Interior features groove/taper for locking UHMWPE or metal liners. Apical threaded hole for insertion instrument; optional titanium alloy plug to prevent particulate migration. Sizes 48mm-66mm; "No Hole" or "Cluster Hole" configurations. Used in total hip replacement procedures; implanted by orthopedic surgeons. Device provides stable acetabular component for articulation with femoral head; HA coating promotes bone integration. Modification includes additional manufacturing site, alternative sterilization sites, and transition to double blister packaging.

Clinical Evidence

No clinical tests were conducted. Substantial equivalence is supported by non-clinical bench testing, including biological safety (ISO 10993-1), sterilization validation (AAMI ANSI ISO 11137), and HA coating characterization per FDA guidance.

Technological Characteristics

Acetabular shell: Forged titanium alloy (ASTM F-620). Porous coating: Commercially pure titanium sintered beads (ASTM F67). HA coating: Hydroxyapatite ceramic (ASTM F1185) applied via plasma spray. Fixation: Cementless. Sterilization: Cobalt-60 Gamma radiation (25-40kGy). Packaging: Double blister (PETG trays, Tyvek lids).

Indications for Use

Indicated for total hip replacement in patients with severe pain/disability due to structural hip damage (rheumatoid/post-traumatic arthritis, collagen disorders, avascular necrosis, nonunion of femoral fractures, congenital dysplasia, protrusio acetabuli, slipped capital femoral epiphysis, or previous fusion). Indicated for revision arthroplasty. Indicated for cementless application.

Regulatory Classification

Identification

A hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across the joint. This generic type of device has a femoral component made of a cobalt-chromium-molybdenum (Co-Cr-Mo) alloy or a titanium-aluminum-vanadium (Ti-6Al-4V) alloy and an acetabular component composed of an ultra-high molecular weight polyethylene articulating bearing surface fixed in a metal shell made of Co-Cr-Mo or Ti-6Al-4V. The femoral stem and acetabular shell have a porous coating made of, in the case of Co-Cr-Mo substrates, beads of the same alloy, and in the case of Ti-6Al-4V substrates, fibers of commercially pure titanium or Ti-6Al-4V alloy. The porous coating has a volume porosity between 30 and 70 percent, an average pore size between 100 and 1,000 microns, interconnecting porosity, and a porous coating thickness between 500 and 1,500 microns. The generic type of device has a design to achieve biological fixation to bone without the use of bone cement.

Predicate Devices

Pinnacle Duofix HA Acetabular Cup Prosthesis (K000306)
Pinnacle Duofix HA Acetabular Cup Prosthesis (K031495)

Related Devices

K031495 — PINNACLE DUOFIX HA ACETABULAR CUP PROSTHESIS · DePuy Orthopaedics, Inc. · Jun 11, 2003
K972393 — INTER-OP HA POROUS ACETABULAR SYSTEM (HA/CSTI) · Sulzer Orthopedics, Inc. · Sep 19, 1997
K141043 — CS2 MULTI-HOLE ACETABULAR SHELL · Consensus Orthopedics, Inc. · May 19, 2014
K071784 — DEPUY PINNACLE WITH GRIPTON ACETABULAR CUPS · DePuy Orthopaedics, Inc. · Jul 25, 2007
K052996 — POROUS TITANIUM ACETABULAR SHELLS · Biomet Manufacturing Corp · Apr 28, 2006

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/0 description: The image contains the logos of the Department of Health & Human Services and the Food and Drug Administration (FDA). The Department of Health & Human Services logo is on the left, and the FDA logo is on the right. The FDA logo includes the letters "FDA" in a blue square, followed by the words "U.S. FOOD & DRUG ADMINISTRATION" in blue text. November 26, 2019 DePuy Orthopaedics, Inc. % Margaret Shaughnessy Regulatory Affairs Project Leader DePuy (Ireland) Loughbeg, Ringakiddy CORK P43D82 IRELAND Re: K192919 Trade/Device Name: Pinnacle Duofix HA Acetabular Cup Prosthesis Regulation Number: 21 CFR 888.3358 Regulation Name: Hip Joint Metal/Polymer/Metal Semi-Constrained Porous-Coated Uncemented Prosthesis Regulatory Class: Class II Product Code: LPH Dated: October 11, 2019 Received: October 15, 2019 Dear Margaret Shaughnessy: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database located at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {1}------------------------------------------------ Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803) for devices or postmarketing safety reporting (21 CFR 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reportingcombination-products); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-device-safety/medical-device-reportingmdr-how-report-medical-device-problems. For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medicaldevices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-device-advice-comprehensive-regulatoryassistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100). Sincerely. for Vesa Vuniqi Acting Assistant Director DHT6A: Division of Joint Arthroplasty Devices OHT6: Office of Orthopedic Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ # Indications for Use 510(k) Number (if known) #### K192919 Device Name DePuy Pinnacle Duofix™ HA Acetabular Cups #### Indications for Use (Describe) The Pinnacle Duofix™ HA Acetabular Cup Prosthesis is indicated for use in total hip replacement procedures for patients suffering severe pain and disability due to structural damage in the hip joint from rheumatoid arthritis, posttraumatic arthritis, collagen disorders, avascular necrosis, and nonunion of femoral fractures. Use of the prosthesis is also indicated for revision of the previous hip arthroplasty and for patients with congenital hip dysplasia, protrusio acetabuli, slipped capital femoral epiphysis and disability due to previous fusion, where bone stock is inadequate for other reconstruction techniques. The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for cementless application. X Prescription Use (Part 21 CFR 801 Subpart D) Over-The-Counter Use (21 CFR 801 Subpart C) ### CONTINUE ON A SEPARATE PAGE IF NEEDED. This section applies only to requirements of the Paperwork Reduction Act of 1995. #### *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.* The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to: > Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov "An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number." {3}------------------------------------------------ # 510(K) SUMMARY (As required by 21 CFR 807.92 and 21 CFR 807.93) | Submitter Information | | |---------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Name | DePuy Orthopaedics | | Address | 700 Orthopedic Drive Warsaw, IN 46582 | | Phone number | 574 372 7020 | | Fax number | 574- 371-4987 | | Establishment Registration Number | 1818910 | | Name of contact person | Kathy Harris | | Date prepared | | | Name of device | | | Trade or proprietary name | Pinnacle Duofix™ HA Acetabular Cup Prosthesis | | Common or usual name | Acetabular Cup Prosthesis | | Classification name | Hip joint metal/polymer/metal semi-constrained porous coated uncemented prosthesis | | Class | II | | Classification panel | 87 Orthopedic and Rehabilitation Devices | | Regulation | 888.3358 | | Product Code(s) | LPH | | Legally marketed device(s) to which equivalence is claimed | Pinnacle Duofix™ HA Acetabular Cup Prosthesis – K000306, K031495 | | Reason for 510(k) submission | The purpose of this submission is to support the manufacturing of the subject Pinnacle Duofix™ HA Acetabular Cup Prosthesis System components at an additional manufacturing facility for all process steps at DePuy Ireland. This includes the HA coating process step within the DePuy Ireland manufacturing site. There is also the addition of two alternative sterilization sites being added for Business Continuity Purposes. There is a modification to the packaging process too. We are converting from a double pouch packaging system to a double blister packaging system as per the original submission K000306 There are no other modifications associated with this product in comparison with the currently marketed Pinnacle Duofix™ HA Acetabular Cup Prosthesis - the predicate and proposed device share the same intended use, product design, principle of operation, and materials. | | Device description | The Pinnacle Duofix HA Acetabular Cup Prosthesis is a sintered, porous- coated (Porocoat®) hemispherical outer acetabular shell manufactured from titanium alloy (Ti-6Al-4V) with a thin layer of hydroxyapatite (HA) coating applied. The interior of the acetabular cup is designed with a groove and a taper for use with either an ultra-high molecular weight polyethylene (UHMWPE) or metal | | | acetabular cup liner, which lock into the shell. Articulation occurs between the liner, and a femoral head with the appropriately sized diameter. The shells contain an apical threaded hole to allow the surgeon to attach the shell insertion instrument and grasp the shell during implantation. An optional titanium alloy (Ti-6Al-4V) apical hole plug is available to screw into the threaded apical hole of the shell. The plug is intended to occlude the apical hole in order to prevent particulate migration and provide polyethylene support. The Pinnacle Duofix HA Acetabular Cup Prosthesis is provided in shell diameter sizes 48mm through 66mm in both the "No Hole" (100 series) and the "Cluster Hole” (Sector series) configurations. | | Intended use of the device | The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for use in total hip replacement procedures for patients suffering severe pain and disability due to structural damage in the hip joint from rheumatoid arthritis, osteoarthritis, post-traumatic arthritis, collagen disorders, avascular necrosis, and nonunion of femoral fractures. Use of the prosthesis is also indicated for revision of the previous hip arthroplasty and for patients with congenital hip dysplasia, protrusio acetabuli, slipped capital femoral epiphysis and disability due to previous fusion, where bone stock is inadequate for other reconstruction techniques. The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for cementless application. | | Indications for use | The Pinnacle Duofix™ HA Acetabular Cup Prosthesis is indicated for use in total hip replacement procedures for patients suffering severe pain and disability due to structural damage in the hip joint from rheumatoid arthritis, osteoarthritis, post-traumatic arthritis, collagen disorders, avascular necrosis, and nonunion of femoral fractures. Use of the prosthesis is also indicated for revision of the previous hip arthroplasty and for patients with congenital hip dysplasia, protrusio acetabuli, slipped capital femoral epiphysis and disability due to previous fusion, where bone stock is inadequate for other reconstruction techniques. The Pinnacle Duofix HA Acetabular Cup Prosthesis is indicated for cementless application | {4}------------------------------------------------ {5}------------------------------------------------ | Characteristics | Subject Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis | Predicate Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis – K031495 | Predicate Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis – K000306 | |-----------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Intended Use | The Pinnacle Duofix™ HA Acetabular Cup Prosthesis is indicated for use in total hip replacement procedures for patients suffering severe pain and disability due to structural damage in the hip joint from rheumatoid arthritis, osteoarthritis, post- traumatic arthritis, collagen disorders, avascular necrosis, and nonunion of femoral fractures. Use of the prosthesis is also indicated for revision of the previous hip arthroplasty and for patients with congenital hip dysplasia, protrusio acetabuli, slipped capital femoral epiphysis and disability due to previous fusion, where bone stock is inadequate for other reconstruction techniques. | Same | Same | | Material | Acetabular Shell: Forged Titanium alloy (Ti-6Al-4V) conforms to ASTM F-620 Porous Coating: Commercially pure unalloyed (ASTM F67) titanium sintered bead porous coating (Porocoat®) HA Coating: the HA powder used in a plasma spray process, conforms to ASTM F1185 Hydroxyapatite ( $Ca_5(PO_4)_3OH$ ) ceramic. | Same | Acetabular Shell: Wrought titanium alloy (Ti- 6Al-4V) conforms to ASTM F-136 or forged titanium alloy (Ti-6Al-4V) conforms to ASTM F-620 Porous Coating: Commercially pure unalloyed (ASTM F67) titanium sintered bead porous coating (Porocoat®) | | Fixation | Cementless | Same | Same | | Cup Size | Pinnacle Cup 100 Series 48, 50, 52, 54, 56, 58, 60, 62, 64, 66 Pinnacle Cup Sector Series 48, 50, 52, 54, 56, 58, 60, 62, 64, 66 | Same | Same | | Characteristics | Subject Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis | Predicate Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis - K031495 | Predicate Device: Pinnacle Duofix™ HA Acetabular Cup Prosthesis - K000306 | | Sterile Method | Sterilization method and dose: Cobalt-60-Gamma radiation (25- 40kGy) | Same | Same | | Packaging | Double blister packaging consisting of inner and outer trays of Polyethylene Terephthalate Glycol copolymer (PETG) with lids of TYVEK®. | Double peel pouch packaging consisting of an inner and an outer vacuum sealed pouch of Nylon polymer | Same | | Shelf Life | 10 Year | Same | Same | {6}------------------------------------------------ ## PERFORMANCE DATA ## SUMMARY OF NON-CLINICAL TESTS CONDUCTED FOR DETERMINATION OF SUBSTANTIAL EQUIVALENCE The following tests were performed on the Pinnacle Cup to demonstrate substantial equivalence of safety and efficacy with the predicate devices: - Biological safety per ISO 10993-1 "Biological Evaluation of Medical Devices Part 1: . Evaluation and Testing". - . Sterilization validation per AAMI ANSI ISO 11137-1: 2006/(R)2010 and AAMI ANSI ISO 11137-2: 2013 - Characterization testing of Hydroxyapatite Coating as recommended per FDA Guidance: ● "510(k) Information Needed for Hydroxyapatite Coated Orthopedic Implant" ## SUMMARY OF CLINICAL TESTS CONDUCTED FOR DETERMINATION OF SUBSTANTIAL EQUIVALENCE AND/OR OF CLINICAL INFORMATION No clinical tests were conducted to demonstrate substantial equivalence. ### CONCLUSIONS DRAWN FROM NON-CLINICAL AND CLINICAL DATA The subject DePuy Pinnacle Cup products are substantially equivalent to the predicate Pinnacle Cup products (K00306, K031495)