MicroMatrix

K153754 · Acell, Inc. · KGN · Mar 14, 2016 · SU

Device Facts

• Record ID: K153754
• Device Name: MicroMatrix
• Applicant: Acell, Inc.
• Product Code: KGN · SU
• Decision Date: Mar 14, 2016
• Decision: SESE
• Submission Type: Special
• Device Class: Class U
• Attributes: Therapeutic

Intended Use

MicroMatrix® is intended for the management of topical wounds including: partial and full-thickness wounds, pressure ulcers, venous ulcers, diabetic ulcers, chronic vascular ulcers, tunnel/undermined wounds (donor sites/ grafts, post-Mohs surgery, post-laser surgery, podiatric, wound dehiscence), trauma wounds (abrasions, lacerations, second-degree burns, and skin tears), and draining wounds. The device is intended for one-time use.

Device Story

MicroMatrix is a porcine-derived extracellular matrix (urinary bladder matrix) wound dressing; supplied as dry, absorbent particulate in two size distributions (<500um and <1000um). Applied by clinicians to topical wounds in dry or pre-hydrated state; can be used adjunctively with other sheet-based extracellular matrix scaffolds. Device acts as a scaffold for wound management; supports healing of various chronic and acute wounds. Terminally sterilized via electron beam irradiation; intended for one-time use.

Clinical Evidence

Bench testing only. Biocompatibility testing (cytotoxicity, sensitization, irritation, systemic toxicity, pyrogenicity, genotoxicity, implantation) performed with 10X safety factor. Hydration uptake testing supported pre-hydration labeling. Clinical use of urinary bladder matrix supported by retrospective review of published literature.

Technological Characteristics

Porcine-derived urinary bladder matrix (ECM); dry particulate form (<500um and <1000um). Terminally sterilized via electron beam irradiation. Packaged in amber glass vials with butyl stoppers. Biocompatibility per ISO-10993-1.

Indications for Use

Indicated for management of topical wounds including partial/full-thickness wounds, pressure/venous/diabetic/chronic vascular ulcers, tunnel/undermined wounds, surgical wounds (donor sites/grafts, post-Mohs/laser, podiatric, dehiscence), trauma wounds (abrasions, lacerations, second-degree burns, skin tears), and draining wounds.

Predicate Devices

• ACell Powder Wound Dressing (K060888)

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of three human profiles facing right, stacked on top of each other, with flowing lines representing hair or movement.

Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002

March 14, 2016

ACell, Inc % Mr. John Smith Hogan Lovells 555 13th St., NW Washington, DC 20004

Re: K153754 Trade/Device Name: Micromatrix Regulatory Class: Unclassified Product Code: KGN Dated: February 19, 2016 Received: February 19, 2016

Dear Mr. Smith:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical devicerelated adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

{1}------------------------------------------------

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number [phone] or [phone] or at its Internet address

http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to

http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.

You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number [phone] or [phone] or at its Internet address

http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.

Sincerely yours,

# David Krause -S

for Binita S. Ashar, M.D., M.B.A., F.A.C.S. Director Division of Surgical Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

# Indications for Use

510(k) Number (if known) K153754

Device Name MicroMatrix®

#### Indications for Use (Describe)

MicroMatrix® is intended for the management of topical wounds including: partial and full-thickness wounds, pressure ulcers, venous ulcers, diabetic ulcers, chronic vascular ulcers, tunnel/undermined wounds (donor sites/ grafts, post-Mohs surgery, post-laser surgery, podiatric, wound dehiscence), trauma wounds (abrasions, lacerations, second-degree burns, and skin tears), and draining wounds. The device is intended for one-time use.

Type of Use (Select one or both, as applicable)

| <div> <input checked="true" type="checkbox"/> Prescription Use (Part 21 CFR 801 Subpart D) </div> | <div> <input type="checkbox"/> Over-The-Counter Use (21 CFR 801 Subpart C) </div> |
|----------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------------------|
|----------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------------------|

#### CONTINUE ON A SEPARATE PAGE IF NEEDED.

This section applies only to requirements of the Paperwork Reduction Act of 1995.

#### *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.*

The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:

> Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff(@fda.hhs.gov

"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."

{3}------------------------------------------------

### 510(k) SUMMARY

Date Prepared: March 10, 2016

#### Manufacturer Name: Submitted by:

ACell, Inc. 6640 Eli Whitney Drive Columbia, MD 21046

Contact Person:

Salman Elmi Vice President, Deputy General Counsel ACell, Inc. Phone: [phone] Email: [e-mail] Fax: [phone]

# DEVICE NAME AND CLASSIFICATION

| Trade/Proprietary Name: | MicroMatrix® |
|-------------------------|---------------------------------------------------------|
| Common/Usual Name: | Animal-derived, extracellular matrix wound care product |
| Regulation Name: | Collagen Wound Dressing |
| Device Class: | Unclassified |
| Product Code: | KGN |
| Reviewing Panel: | General & Plastic Surgery |

# PREDICATE DEVICE

Predicate Device: ACell Powder Wound Dressing (K060888)

## DEVICE DESCRIPTION

MicroMatrix® is composed of porcine-derived extracellular matrix scaffolds, specifically known as urinary bladder matrix. The devices are supplied as a dry, absorbant, white to off-white particulate with two particle distributions, specifically <500um and <1000um. The particulate is packaged in an amber glass vial with butyl stopper and crimp sealed. The device is packaged in a peel-open pouch. The devices are terminally sterilized using electron beam irradiation. The device is intended for one time use. MicroMatrix® can be applied to a wound either in the dry state or pre-hydrated, and can be used in conjunction with other sheet based extracellular matrix derived scaffolds indicated for wound management.

Image /page/3/Picture/14 description: The image shows the logo for ACell. The logo consists of a cluster of seven teal circles arranged in a hexagonal pattern, followed by the text "ACell" in a bold, teal font. The text is slightly italicized, giving the logo a modern and dynamic appearance.

{4}------------------------------------------------

## INDICATIONS FOR USE

MicroMatrix® is intended for the management of topical wounds including: partial and fullthickness wounds, pressure ulcers, venous ulcers, diabetic ulcers, chronic vascular ulcers, tunnel/undermined wounds, surgical wounds (donor sites/grafts, post-Mohs surgery, post-laser surgery, podiatric, wound dehiscence), trauma wounds (abrasions, second-degree burns, and skin tears), and draining wounds. The device is intended for one-time use.

## PERFORMANCE DATA

Biocompatibility testing with a 10X safety factor in accordance with ISO-10993-1 (cytotoxicity, sensitization, irritation/intracutaneous reactivity, acute systemic toxicity, pyrogenicity, acute and subchronic toxicity, implantation, genotoxicity, and LAL endotoxin) was conducted to support labeling changes to describe pre-hydration of MicroMatrix®, labeling changes to describe use of MicroMatrix® with other sheet based extracellular matrix derived scaffolds indicated for wound management, and the addition of a smaller particle size specification (<500 um). Labeling changes to describe pre-hydration of MicroMatrix® were also supported by hydration uptake testing. Labeling changes to describe use of MicroMatrix® with other sheet based extracellular matrix derived scaffolds indicated for wound management were also supported by a retrospective review of published literature describing the clinical use of urinary bladder matrix devices in wound management.

# COMPARISON OF TECHNOLOGICAL CHARACTERISTICS WITH THE PREDICATE DEVICE

MicroMatrix® has the same intended use as the predicate device, which is for management of wounds. The technological characteristics of the MicroMatrix® are substantially equivalent to the cleared predicate, as both are comprised of the same animal tissue-derived. collagen extracellular matrix (ECM) scaffolds that are packaged and terminally sterilized. The only minor differences between MicroMatrix® and the ACell Powder Wound Dressing predicate are the addition of a smaller particle size specification (<500 µm), and minor changes to the labeling to describe pre-hydration of MicroMatrix® and use of MicroMatrix® with other sheet based extracellular matrix derived scaffolds indicated for wound management. None of the changes alter the intended therapeutic effect of the device or its technological characteristics. The minor differences between the MicroMatrix® and the identified predicate do not raise different questions of safety or efficacy, and performance testing demonstrates that the device has comparable performance to the predicates.

## CONCLUSION

Based on testing and comparison to the predicate devices. MicroMatrix® does not raise different questions of safety and effectiveness and the results support a determination of substantial equivalence through this 510(k) Premarket Notification.

Image /page/4/Picture/10 description: The image shows the logo for ACell. The logo consists of a cluster of teal-colored circles on the left, resembling a group of cells. To the right of the circles is the text "ACell" in a gray, sans-serif font, with the "ell" portion slightly smaller and raised.