SECURE-LOOP
K151601 · Xiros, Ltd. · MBI · Sep 9, 2015 · Orthopedic
Device Facts
| Record ID | K151601 |
| Device Name | SECURE-LOOP |
| Applicant | Xiros, Ltd. |
| Product Code | MBI · Orthopedic |
| Decision Date | Sep 9, 2015 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 888.3040 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Intended Use
The SECURE-LOOP fixation device is used for fixation of tendons and ligaments during orthopaedic reconstruction procedures such as anterior cruciate ligament (ACL) reconstruction.
Device Story
SECURE-LOOP is an orthopedic fixation device consisting of a polyester continuous loop attached to a titanium alloy button. Used during arthroscopic ligament reconstruction (e.g., ACL repair). The button is positioned on the bone cortex at the exit of a bone tunnel, suspending the loop within the tunnel to secure the graft. Surgeons use integrated sutures to pull the graft assembly into position and flip the button to lock it against the bone. The device provides mechanical fixation for soft tissue to bone. It is intended for use by orthopedic surgeons in a clinical/OR setting.
Clinical Evidence
No clinical data. Substantial equivalence is supported by bench testing, including stiffness, tensile strength, and cyclic fatigue testing compared to the predicate device.
Technological Characteristics
Materials: Polyester continuous loop, titanium alloy button. Principle: Mechanical bone fixation fastener. Form factor: Button and loop assembly. Sterilization: Not specified. Connectivity: None. Software: None.
Indications for Use
Indicated for patients undergoing orthopedic reconstruction procedures, such as ACL reconstruction, requiring fixation of tendons and ligaments.
Regulatory Classification
Identification
A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.
Predicate Devices
- Smith & Nephew, Inc, Endobutton Continuos Loop (ECL) (K980155)
Related Devices
- K191053 — Xtreme-Loop · Xiros, Ltd. · Jul 17, 2019
- K220906 — SECURE-LOCK · Xiros, Ltd. · Jul 22, 2022
- K193165 — MectaFix CL Fixation Button with Continuous Loop · Medacta International S.A. · Feb 10, 2020
- K202291 — Button Loop · Yunyi (Beijing) Medical Device Co., Ltd. · Jan 8, 2021
- K980155 — ENDOBUTTON CONTINUOUS LOOP · Smith & Nephew, Inc. · Apr 1, 1998
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized caduceus symbol, which is a staff with two snakes coiled around it, and the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged in a circular pattern around the symbol. The caduceus is a common symbol associated with healthcare and medicine.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
September 9, 2015
Xiros, Limited Stephen Seed Regulatory Manager Springfield House Whitehouse Lane Leeds LS19 7UE England
Re: K151601
Trade/Device Name: SECURE-LOOP Regulation Number: 21 CFR 888.3040 Regulation Name: Smooth or threaded metallic bone fixation fastener Regulatory Class: Class II Product Code: MBI Dated: June 2, 2015 Received: June 12, 2015
Dear Mr. Seed:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set
{1}------------------------------------------------
forth in the quality systems (OS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely yours,
# Mark N. Melkerson -S
Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
#### Indications for Use
510(k) Number (if known) K151601
Device Name SECURE-LOOP
Indications for Use (Describe)
The SECURE-LOOP is used for fixation of tendons and ligaments during orthopedic reconstruction procedures such as anterior cruciate ligament (ACL) reconstruction.
Type of Use (Select one or both, as applicable)
> Prescription Use (Part 21 CFR 801 Subpart D)
Over-The-Counter Use (21 CFR 801 Subpart C)
#### CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
#### *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.*
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
> Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff(@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
Form Approved: OMB No. 0910-0120 Expiration Date: January 31, 2017 See PRA Statement below.
{3}------------------------------------------------
Image /page/3/Picture/0 description: The image shows the word "XIROS" in gray, enclosed in a gray, rounded shape. The shape resembles a pill or capsule with a small extension on the right side. The text is in a simple, sans-serif font and is centrally aligned within the shape. The background is plain white.
#### SECTION 5. 510(k) SUMMARY
In accordance with 21 CFR 807.92, the following information constitutes Xiros Ltd. 510(k) summary for the SECURE-LOOP.
### I.SUBMITTER INFORMATION
| Submitter`s Name: | Xiros Limited |
|-------------------|-------------------------------------------------------------------|
| Address: | Springfield House<br>Whitehouse Lane<br>Leeds LS19 7UE<br>England |
| Telephone Number: | +44 (0)1132387200 |
| Fax Number: | +44 (0)113 2387201 |
| Contact Person: | Stephen Seed (Regulatory Affairs Manager) |
| Date: | 01.09.2015 |
| 510(K) number: | K151601 |
## II. DEVICE IDENTIFICATION
| Name of Device: | SECURE-LOOP |
|-----------------------|--------------------------------------------------------------------------------------------------|
| Trade Name: | SECURE-LOOP |
| Common or usual name: | Suture retention device; Surgical Button, Polyester Surgical<br>Suture, ACL suspension fixation. |
| Classification Name: | Fastener, fixation, non-degradable soft tissue |
| Regulatory Class: | Class II |
| Product Code: | MBI |
| Regulation: | 888.3040 |
| Panel: | Orthopaedic |
#### III. PREDICATE DEVICE
Smith & Nephew, Inc , Endobutton Continuos Loop (ECL) K980155. This predicate has not been subject to a design related recall. No reference devices were used in this submission.
#### IV. DEVICE DESCRIPTION
The SECURE-LOOP fixation device consists of a polyester continuous loop captured on a titanium alloy button. The button sits on the exit to a bone tunnel on the cortex, suspending the continuous loop inside the tunnel to provide secure, strong fixation for ligament reconstruction. The SECURE-LOOP fixation device is supplied with sutures that are used to pull the graft
{4}------------------------------------------------
Image /page/4/Picture/0 description: The image shows a logo with the word "XIROS" in a rounded rectangle. The text is in a bold, sans-serif font and appears to be gray. The rectangle has rounded corners and a double-line border. A horizontal line extends from the right side of the rectangle.
assembly into place and then flip the button allowing ligament reconstruction to be performed arthroscopically.
# V. INDICATIONS FOR USE
The SECURE-LOOP fixation device is used for fixation of tendons and ligaments during orthopaedic reconstruction procedures such as anterior cruciate ligament (ACL) reconstruction.
#### VI. COMPARISIONS OF TECHNOLOGICAL CHARACTERISTICS WITH THE PREDICATE DEVICE
The SECURE-LOOP has the same technological characteristics as the predicate Endobutton Continuous Loop device, with respect to intended use, labelling, material composition, chemical formulation, design, design tolerances, functionality and use the same manufacturing methods.
#### VII. PERFORMANCE DATA
The SECURE-LOOP when tested against the Endobutton Continuous Loop (K980155) for stiffness, tensile strength, cyclic fatigue testing, and functional testing, was determined to be substantially equivalent. The testing demonstrated that the differences between the new device and the predicate device do not raise any new issues of safety and efficacy. The performance data benefit/risk analysis concluded that the differences encountered do not affect the safety and efficacy of the new device in relation to the predicate.
Summary: Based on the pre-clinical testing performance, the SECURE-LOOP is found to have a safety and effectiveness profile that is similar to the predicate device.
#### VIII.CONCLUSION
The SECURE-LOOP is composed of the same material and has the same design as the predicate device. It is manufactured in the same manner and uses the same methods of that used to manufacture the predicate device.
Testing performed demonstrate that the SECURE-LOOP is substantially equivalent to the Smith &Nephew Endobutton CL fixation device.
Xiros therefore conclude the SECURE-LOOP is substantially equivalent to the Smith & Nephew Endobutton CL fixation device.