LEADERFLEX

K141026 · Vygon · FOZ · Jul 30, 2014 · General Hospital

Device Facts

Record IDK141026
Device NameLEADERFLEX
ApplicantVygon
Product CodeFOZ · General Hospital
Decision DateJul 30, 2014
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 880.5200
Device ClassClass 2
AttributesTherapeutic, Pediatric

Intended Use

Leaderflex catheters are indicated for: · Arterial catheterization in adults · Central venous catheterization (jugular, subclavian) in children · Peripheral venous catheterization (Midline) in any patient population with consideration given to adequacy of vascular anatomy and appropriateness of procedure

Device Story

Leaderflex is a radiopaque, biostable polyurethane intravascular catheter. It is inserted via the Seldinger technique for arterial, central venous, or peripheral venous (Midline) access. The device is intended for use by healthcare professionals in clinical settings. It provides a conduit for therapeutic applications. The device is identical to the previously cleared Vygon Leaderflex (K052564) and shares midline indications with the cited predicate devices. It is used to facilitate vascular access, potentially benefiting patients requiring short-term (less than 30 days) intravenous or arterial therapy.

Clinical Evidence

No clinical data. Substantial equivalence is based on identical technological characteristics to the Vygon predicate and shared indications with the Bard predicate devices. A risk analysis was performed to evaluate the safety and effectiveness of the midline indication.

Technological Characteristics

Radiopaque, biostable polyurethane intravascular catheter. Dimensions and form factor are identical to the Vygon predicate (K052564). Insertion via Seldinger technique. No electronic components or software.

Indications for Use

Indicated for arterial catheterization in adults, central venous catheterization (jugular, subclavian) in children, and peripheral venous (Midline) catheterization in any patient population, contingent on vascular anatomy and procedure appropriateness.

Regulatory Classification

Identification

An intravascular catheter is a device that consists of a slender tube and any necessary connecting fittings and that is inserted into the patient's vascular system for short term use (less than 30 days) to sample blood, monitor blood pressure, or administer fluids intravenously. The device may be constructed of metal, rubber, plastic, or a combination of these materials.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ K141026 JUL 3 0 2014 Leaderflex Premarket Notification 510(k) Submission 21 April 2014 # PREMARKET NOTIFICATION 510(k) SUMMARY (As Required By 21 CFR §807.92) 510k number: K141026 Applicant: Vygon Corporation 2750 Morris Road, Suite A200 Lansdale, PA 19446 Contact Name: Jillian Mikovich Regulatory Affairs Manager Phone: 800-473-5414 Fax: 215-672-6740 Leaderflex Trade Name: Common Name: Intravascular Catheter 21 CFR 880.5200 Regulation Number: Product Code: FOZ Catheter, Intravascular, Therapeutic, Short-term Less than 30 days Classification Name: Regulatory Class: Class II Vygon Leaderflex, K052564 Predicate Devices: Bard Powerglide Midline Catheter, K121073 Bard Poly Per-Q-Cath Midline, K001901 April 21, 2014 Date Prepared: Device Description: Leaderflex is a radiopaque biostable polyurethane catheter suitable for a variety of venous and arterial applications. Leaderflex is inserted via Seldinger technique. Intended Use: Leaderflex catheters are indicated for: · Arterial catheterization in adults · Central venous catheterization (jugular, subclavian) in children · Peripheral venous catheterization (Midline) in any patient population with consideration given to adequacy of vascular anatomy and appropriateness of procedure Technology Characteristics: Leaderflex is identical to the legally marketed Vygon predicate device. The subject device shares the midline indication with both the Bard Powerglide and Poly Per-Q-Cath Midline catherters. Non-Clinical Summary: The subject device is completely identical to the Vygon predicate and shares a common indication with both Bard predicates. A risk analysis > has been completed to show that the safety and effectiveness of the device has not been altered with the addition of the midline indication. {1}------------------------------------------------ Given the above, the subject device, using Vygon Leader-Flex, Bard Powerglide Midline and Bard Poly Per-Q-Cath Midline as the predicate devices, meets regulatory requirements for Demonstration of substantial equivalence (see Premarket Notification Review Program 6/30/86 (K86-3) FDA blue book memorandum, "Guidance on the CDRH Premarket Notification Review Program"). {2}------------------------------------------------ Image /page/2/Picture/1 description: The image shows the logo for the Department of Health & Human Services - USA. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized design featuring three overlapping shapes that resemble an abstract bird or wing-like structure. Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002 #### July 30, 2014 Vygon Corporation Jillian Mikovich Regulatory Affairs Manager 2750 Morris Road, Suite A200 Lansdale, PA 19446 Re: K141026 Trade/Device Name: Leaderflex Regulation Number: 21 CFR 880.5200 Regulation Name: Intravascular catheter Regulatory Class: II Product Code: FOZ Dated: July 17, 2014 Received: July 18, 2014 Dear Ms. Mikovich: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {3}------------------------------------------------ Page 2 - Ms. Mikovich Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Sincerely yours. MarySTBber-S Erin I. Keith, M.S. Director Division of Anesthesiology, General Hospital, Respiratory, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ ### Indications for Use 510{k) Number (if known) K141026 Device Name Leaderflex Indications for Use (Describe) Leaderflex catheters are indicated for: - · Arterial catheterization in adults - · Central venous catheterization (jugular, subclavian) in children - · Peripheral venous catheterization (Midline) in any patient population with consideration given to adequacy of vascular anatomy and appropriateness of procedure Type of Use (Select one or both, as applicable) 2 Prescription Use (Part 21 CFR 801 Subpart D) Over-The-Counter Use (21 CFR 801 Subpart C) # PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON A SEPARATE PAGE IF NEEDED. FOR FOR FOR FDAIUSE ONLY ్రాల్యే శిశు శాశాల, ప్ర Concurrence of Center for Devices and Radiological Health (CDRH) (Signature) Image /page/4/Picture/14 description: The image shows the logo for the Food and Drug Administration (FDA). The logo is in black and white and is made up of the letters "FDA". The letters are stylized and have a three-dimensional appearance. The logo is simple and recognizable. Digitally signed by Richard C. Chapman -S Date: 2014.07.29 12:37:10 -04'00' This section applies only to requirements of the Paperwork Reduction Act of 1995. # *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.* The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to: > Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov "An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number." Form Approved: OMB No. 0910-0120 Expiration Date: January 31, 2017 See PRA Statement below.
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...