VARIAX 2 SYSTEM
K140376 · Stryker Trauma AG · HRS · Apr 3, 2014 · Orthopedic
Device Facts
| Record ID | K140376 |
| Device Name | VARIAX 2 SYSTEM |
| Applicant | Stryker Trauma AG |
| Product Code | HRS · Orthopedic |
| Decision Date | Apr 3, 2014 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 888.3030 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Intended Use
The Stryker VariAx 2 System is intended for use in internal fixation, reconstruction and treatment of fractures in the foot and ankle in adult and adolescent (12-21 years) patients. Including: . Replantation Joint fusions . Corrective osteotomies ● Osteopenic bone .
Device Story
Internal bone fixation system; consists of metallic plates and compatible screws; used for foot and ankle fracture treatment, reconstruction, replantation, joint fusions, and corrective osteotomies. Operated by orthopedic surgeons in clinical/surgical settings. Provides mechanical stabilization of bone segments to facilitate healing. Subject components available sterile and non-sterile; sizes 14-70mm.
Clinical Evidence
No clinical data. Substantial equivalence established via non-clinical bench testing, specifically construct fatigue strength testing.
Technological Characteristics
Metallic bone fixation plates and screws. Dimensions range from 14-70mm. Mechanical fixation principle. No software or electronic components.
Indications for Use
Indicated for internal fixation, reconstruction, and treatment of foot and ankle fractures in adult and adolescent (12-21 years) patients, including replantation, joint fusions, corrective osteotomies, and osteopenic bone.
Regulatory Classification
Identification
Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.
Predicate Devices
- Stryker Foot Plating System (K063875)
- Synthes 2.4 MM/2.7 MM Variable Angle LCP Forefoot/Midfoot System (K100776)
- DePuy ALPS Small Bone Locked Plating System (K101240)
- Synthes 2.4mm/2.7mm Variable Angle (VA)- LCP Forefoot/ Midfoot System (K091214)
Related Devices
- K193222 — Tyber Medical Anatomical Plating System · Tyber Medical, LLC · Jan 20, 2020
- K172973 — Life Spine Foot and Ankle Plating System · Life Spine, Inc. · Dec 21, 2017
- K123000 — INTEGRA TOTAL FOOT SYSTEMS · Integra LifeSciences Corporation · Dec 21, 2012
- K182991 — EPIC Extremity Fusion Plate System · Epic Extremity, LLC · Feb 13, 2019
- K232652 — Anatomical Plating System (various) · Tyber Medical, LLC · Dec 13, 2023
Submission Summary (Full Text)
{0}------------------------------------------------
## APR 0 3 2014
Proprietary Name:
VariAx 2 System
Common Name:
Bone plates
Classification Name and Reference: Single/multiple component metallic bone fixation appliances and accessories 21 CFR §888.3030
Regulatory Class:
Class II
Product Codes:
87 HRS: Plate, Fixation, Bone
Sponsor:
Stryker Trauma AG Bohnackerweg 1 CH-2545 Selzach Switzerland
Contact Person:
· Estela Celi Regulatory Affairs Specialist 325 Corporate Drive Mahwah, NJ 07430 Phone: (201) 831-6461 Fax: (201) 831-3461 estela.celi@stryker.com
Date Prepared:
February 11, 2014
#### Description
This Traditional 510(k) submission is being supplied to the U.S. FDA to provide authorization to market the new VariAx 2 System. The VariAx 2 System is an internal fixation device that consists of various plates used with compatible screws to fit different types of fractures in the foot and ankle. The subject components will be available sterile and non-sterile. The plates will be available in sizes ranging from 14-70mm in length.
{1}------------------------------------------------
#### Intended Use
The Stryker VariAx 2 System is intended for use in internal fixation, reconstruction and treatment of fractures in the foot and ankle in adult and adolescent (12-21 years) patients.
#### Indications
The Stryker VariAx 2 System is intended for use in internal fixation, reconstruction and treatment of fractures in the foot and ankle in adult and adolescent (12-21 years) patients. Including:
- . Replantation
- Joint fusions .
- Corrective osteotomies ●
- Osteopenic bone .
#### Summary of Technologies
Device comparison showed that the proposed device is substantially equivalent in intended use, materials and performance characteristics to the following predicate devices:
- K063875 Stryker Foot Plating System ◆
- K100776 Synthes 2.4 MM/2.7 MM Variable Angle LCP Forefoot/Midfoot System .
- K101240 DePuy ALPS Small Bone Locked Plating System .
- K091214 Synthes 2.4mm/2.7mm Variable Angle (VA)- LCP Forefoot/ Midfoot . System
#### Non-Clinical Testing
Non-clinical laboratory testing was performed on the VariAx 2 System components to determine substantial equivalence. Testing demonstrated that the VariAx 2 System is substantially equivalent to the predicate devices currently cleared for marketing.
The following testing was performed
- Construct Fatigue Strength Testing .
#### Clinical Testing
Clinical testing was not required for this submission.
#### Conclusion
The VariAx 2 System is substantially equivalent to the predicate device identified in this premarket notification.
{2}------------------------------------------------
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized symbol that resembles an abstract representation of a human figure or a caduceus, rendered in black.
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
April 3, 2014
Stryker Trauma AG Ms. Estela Celi Specialist Regulatory Affairs 325 Corporate Drive Mahwah, New Jersey 07430
Re: K140376
Trade/Device Name: VariAx 2 System Regulation Number: 21 CFR 888.3030 Regulation Name: Single/multiple component metallic bone fixation appliances and accessories Regulatory Class: Class II Product Code: HRS Dated: February 11, 2014 Received: February 14, 2014
Dear Ms. Celi:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set
{3}------------------------------------------------
#### Page 2 - Ms. Estela Celi
forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act): 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Small Manufacturers, International and Consumer Assistance at its tollfree number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers. International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely yours,
### Lori A. Wiggins
- for
Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
#### Indications for Use
510(k) Number (if known): K140376
Device Name: VariAx 2 System
Indications for Use:
The Stryker VariAx 2 System is intended for use in internal fixation, reconstruction and treatment of fractures in the foot and ankle in adult and adolescent (12-21 years) patients. Including:
- . Replantation
- . Joint fusions
- Corrective osteotomies .
- . Osteopenic bone
Over-The-Counter Use Prescription Use X AND/OR (Part 21 CFR 801 Subpart D) (21 CFR 807 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
# Elizabet同必Frank -S
Division of Orthopedic Devices