BIOPSY DIGIT S BIOPSY SL

K113607 · Giotto USA, LLC · IZH · Aug 10, 2012 · Radiology

Device Facts

• Record ID: K113607
• Device Name: BIOPSY DIGIT S BIOPSY SL
• Applicant: Giotto USA, LLC
• Product Code: IZH · Radiology
• Decision Date: Aug 10, 2012
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 892.1710
• Device Class: Class 2

Intended Use

The Biopsy Digit S and SL are intended to be used for mammographic procedures requiring stereotactic guidance, such as fine needle aspiration, needle biopsy and guide wire placement.

Device Story

Biopsy Digit S/SL is a needle guidance system accessory for the Giotto Image 3D/DL mammography system. It replaces the CMOS camera of the predicate (Biopsy Digit AM) with a portion of the Giotto Image 3D/DL's amorphous selenium detector to acquire targeting images. The system acquires two X-ray exposures at ± 22.6° angles to create a stereo pair of 2D projections. The operator identifies a region of interest on a monitor; the system uses trigonometry to calculate 3D coordinates. These coordinates are transferred to a needle-positioning unit that drives a needle holder to the target location for biopsy or wire placement. Used in clinical settings by healthcare professionals. Benefits include precise needle placement for diagnostic procedures.

Clinical Evidence

No clinical data. Evidence consists of bench testing, including comparative image parameter testing between the aSe detector and the predicate CMOS detector, stereotactic accuracy testing in compliance with IEC Standard 60601-2-45, and end-user validation testing. Compliance with IEC 60601-1-2, 60601-1-3, and 62304 was also demonstrated.

Technological Characteristics

Stereotactic needle guidance system; utilizes amorphous selenium (aSe) digital detector; electro-mechanical needle-positioning unit; powered by Giotto Image 3D/DL system. Complies with IEC 60601-1-2, 60601-1-3, and 62304 standards. Software-based coordinate calculation.

Indications for Use

Indicated for patients undergoing mammographic procedures requiring stereotactic guidance, including fine needle aspiration, needle biopsy, and guide wire placement.

Regulatory Classification

Identification

A mammographic x-ray system is a device intended to be used to produce radiographs of the breast. This generic type of device may include signal analysis and display equipment, patient and equipment supports, component parts, and accessories.

Predicate Devices

• Giotto Biopsy Digit AM (K062039)

Submission Summary (Full Text)

{0}------------------------------------------------

K113607

### Section 5: 510(k) Summary

AUG 1 0 2012

| Submitter: | Giotto USA, LLC<br>7324 Greenbriar Circle<br>Wichita, KS 67226 |
|-------------------------|------------------------------------------------------------------------------------------------------------------------------------------|
| Official Correspondent: | Jillian M. Reed<br>Regulatory and Clinical Affairs Consultant<br>Reed Technical Associates, LLC<br>23 Griswold Lane<br>Winsted, CT 06098 |
| | O: 860-238-7734 |
| | F: 203-538-3960 |
| | [e-mail] |
| Date Prepared: | August 8, 2012 |
| Classification Name: | System, X-Ray, Mammographic |
| Common Name: | Mammographic X-Ray System |
| Product Code: | IZH |
| Proprietary Name: | Giotto Biopsy Digit S/SL |
| Predicate Devices: | #K062039 Giotto Biopsy Digit AM |

## Device Description:

The Biopsy Digit S and Biopsy Digit SL are modifications to the Biopsy Digit AM needle guidance system. previously cleared as #K062039. and supplied as an accessory to the Giotto Image 3D/DL mammography system. The CMOS digital camera used on the Biopsy Digit AM is not used on the Biopsy Digit S/SL. Rather a 65mm (high) X 80mm (wide) portion of the full field amorphous selenium detector of the Giotto Image 3D/DL is used to acquire the mammographic, targeting, image data. The mechanics, cleanable surfaces, on-board electronics, and user interface software are all the same as on the biopsy Digit AM. The Biopsy Digit S/SL receives power from the Giotto Image 3D/DL. The Biopsy Digit S/SL in conjunction with the Giotto Image 3D/DL, take two exposures at separate angles ± 22.6° from the perpendicular of the digital detector centerline. The x-ray tube is driven first to one side of center and then to the other by an electro-mechanical mechanism, which is an integral part of the Giotto Image 3D/3DL, so that a stereo pair of images can be acquired. The two views provide two separate 2dimensional projections of the subject anatomy. The two views are stored in the computer system, and can be retrieved and viewed on the computer monitor. The operator, using a mouse, identifies the region of interest on the monitor. The computer then calculates of the region of interest in three dimensions, using trigonometry, and then transfers the coordinates to the needle-positioning unit. The software algorithm used for the calculation is identical to

{1}------------------------------------------------

that used by the Biopsy Digit AM (#K062039). The needle-positioning unit then drives the needle holder to the required location so that the operator can insert the needle or locating wire into the exact coordinates necessary.

## Intended Use:

The Biopsy Digit S and SL are intended to be used for mammographic procedures requiring stereotactic guidance, such as fine needle aspiration, needle biopsy and guide wire placement.

## Substantial Equivalence:

Non-Clinical testing has demonstrated that the Biopsy Digit S/SL is substantially equivalent to the predicate device, the Biopsy Digit AM. The use of new technology does not introduce new issues of safety or effectiveness.

## Discussion of Non-Clinical Testing Performed:

Thorough non-clinical testing was performed to demonstrate that the Biopsy Digit S/SL is substantially equivalent to the predicate device, the Biopsy Digit AM, for the safe and effective use of the device for its intended use. This testing included comparative image parameter testing performed between the new aSe detector and the older CMOS detector, stereotactic accuracy testing for both biopsy systems in compliance with IEC Standard 60601-2-45, and end user validation testing of the Biopsy Digit S/SL system. In addition, testing was performed to demonstrate that the Biopsy Digit S/SL, in conjunction with the Giotto Image 3D/DL complies with the following International Standards: #60601-1-2, #60601-1-3, and #62304.

{2}------------------------------------------------

# Conclusions:

The information provided in this premarket notification submission has shown that the eRAD PACS/eRAD RIS/PACS/ eRAD EPVLite Viewer Software Product is substantially equivalent to the predicate devices and are safe and effective for its intended use.

{3}------------------------------------------------

Image /page/3/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is an abstract symbol resembling a stylized caduceus or a bird-like figure with three curved lines representing wings or streams.

## DEPARTMENT OF HEALTH & HUMAN SERVICES

Public Health Service

Food and Drug Administration 10903 New Hampshire Avenue Document Control Room - WO66-G609 Silver Spring, MD 20993-0002

# AUG 1 0 2012

Giotto USA, LLC % Ms. Jillian M. Reed Regulatory and Clinical Affairs Consultant Reed Technical Associates, LLC 23 Griswold Lane WINSTED CT 06098

Re: K113607

Trade/Device Name: Biopsy Digit S and Biopsy Digit SL Regulation Number: 21 CFR 892.1710 Regulation Name: Mammographic x-ray system Regulatory Class: II Product Code: IZH Dated: July 25, 2012 Received: July 26, 2012

## Dear Ms. Reed:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into class II (Special Controls), it may be subject to such additional controls. Existing major regulations affecting your device can be found in Title 21, Code of Federal Regulations (CFR), Parts 800 to 895. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801 and 809); medical device reporting (reporting of

{4}------------------------------------------------

medical device-related adverse events) (21 CFR 803); and good manufacturing practice modical device-related ad retse ovelity systems (QS) regulation (21 CFR Part 820). This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predication. 1110 results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Parts 801 and 809), please contact the Office of In Vitro Diagnostic Device Evaluation and Safety at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket o 150. Theo, prodot 100.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.

You may obtain other general information on your responsibilities under the Act from the

Tou may of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely Yours,

Janine M. Morris

Acting Director Division of Radiological Devices Office of In Vitro Diagnostic Device Evaluation and Safety Center for Devices and Radiological Health

Enclosure

{5}------------------------------------------------

# Indications for use

510(k) number (if known:

Device names:

Biopsy Digit S and Biopsy Digit SL

Indications for use:

The Biopsy Digit S and SL are intended to be used for mammographic procedures requiring stereotactic guidance, such as fine needle aspiration, needle biopsy and guide wire placement.

Prescription use Over-The-Counter use And/or (Part 21 CFR 801 Subpart D) (Part 21 CFR 801 Subpart D) (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation

(Division Sign-Off)
Division of Radiological Devices
K/12/2007

510k