SYNTHETIC SEEDING SPACER MODEL SS9 X 50-50, SS9 X 55-50, SS9 X 55-150, SS9 X 1CM-30
K100847 · Biocompatibles, Inc. · KXK · May 21, 2010 · Radiology
Device Facts
Record ID
K100847
Device Name
SYNTHETIC SEEDING SPACER MODEL SS9 X 50-50, SS9 X 55-50, SS9 X 55-150, SS9 X 1CM-30
Applicant
Biocompatibles, Inc.
Product Code
KXK · Radiology
Decision Date
May 21, 2010
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 892.5730
Device Class
Class 2
Attributes
Therapeutic
Intended Use
The WorldWide Medical Technologies Synthetic Seeding Spacers intended use is to provide space between radionuclide seeds during the introduction of radionuclide seeds into the body for Rrachstherapy procedures. The anatomical site is typically the transperineal approach for radionuclide seed application in and around the prostate. The devices are sterile, single patient use product.
Device Story
Synthetic seeding spacers used during brachytherapy; device provides physical separation between radionuclide seeds. Used in transperineal prostate seed implantation procedures. Operated by physicians (urologists/radiation oncologists) in clinical settings. Device is sterile, single-patient use. Benefits include consistent seed distribution within target tissue, facilitating accurate radiation dose delivery.
Clinical Evidence
Bench testing only.
Technological Characteristics
Synthetic material; sterile; single-patient use; designed for physical spacing of brachytherapy seeds.
Indications for Use
Indicated for use in brachytherapy procedures to provide spacing between radionuclide seeds during transperineal application in and around the prostate.
Regulatory Classification
Identification
A radionuclide brachytherapy source is a device that consists of a radionuclide which may be enclosed in a sealed container made of gold, titanium, stainless steel, or platinum and intended for medical purposes to be placed onto a body surface or into a body cavity or tissue as a source of nuclear radiation for therapy.
Special Controls
*Classification.* Class II (special controls). A prostate seeding kit intended for use with a radionuclide brachytherapy source only is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 892.9.
Related Devices
K013964 — MODIFICATION TO ACCU-SPACE PLAIN GUT ABSORBABLE SEEDING SPACERS · Cp Medical · Jan 24, 2002
K991344 — WORLDWIDE MEDICAL TECHNOLOGIES SEEDING SPACERS · Worldwide Medical Technologies, LLC · Nov 5, 1999
K020337 — READI-STRAND; MODEL PSSTRAND · Worldwide Medical Technologies, LLC · Jul 29, 2002
K992262 — INDIGO PROSTATE SEEDING NEEDLE CARTRIDGE SYSTEM · Indigo Medical, Inc. · Oct 4, 1999
K022705 — READI-STRAND, MODEL PSSTRAND · Worldwide Medical Technologies, LLC · Jun 9, 2003
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized caduceus symbol, which is a staff with two snakes coiled around it, and the text "DEPARTMENT OF HEALTH & HUMAN SERVICES-USA" arranged in a circular fashion around the symbol. The caduceus is a common symbol associated with healthcare and medicine. The logo is black and white.
## DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room - WO66-G609 Silver Spring, MD 20993-0002
Mr. Wayne W. Richardson Director of Quality, Regulatory Affairs Biocompatibles, Inc. WorldWide Medical Technologies 115 Hurley Road OXFORD CT 06478
MAY 21 2010
Re: K100847
Trade/Device Name: WorldWide Medical Technologies Synthetic Spacer Regulation Number: 21 CFR 892.5730 Regulation Name: Radionuclide brachytherapy source Regulatory Class: II Product Code: KXK Dated: March 7, 2010 Received: March 25, 2010
Dear Mr. Richardson:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into class II (Special Controls), it may be subject to such additional controls. Existing major regulations affecting your device can be found in Title 21, Code of Federal Regulations (CFR), Parts 800 to 895. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801 and 809); medical device reporting (reporting of
{1}------------------------------------------------
medical device-related adverse events) (21 CFR 803); and good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820). This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Parts 801 and 809), please contact the Office of In Vitro Diagnostic Device Evaluation and Safety at (301) 796-5450. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely yours.
Donald J. Trump
Donald J. St. Pierre Acting Director Division of Radiological Devices Office of In Vitro Diagnostic Device Evaluation and Safety Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
EXHIBIT 1
510(k) Number (if known):
): [RS1001]
Device Name: Worldwide Medical Technologies Synthetic Spacrer
Indications For Use:
The WorldWide Medical Technologies Synthetic Seeding Spacers intended use is to provide space between radionuclide seeds during the introduction of radionuclide seeds into the body for Rrachstherapy procedures. The anatomical site is typically the transperineal approach for radionuclide seed application in and around the prostate.
The devices are sterile, single patient use product. Prescription Use
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
| Concurrence of CDRH, Office of Device Evaluation (ODE) | |
|------------------------------------------------------------|-----------------------------|
| Prescription Use | X |
| OR | Over-The-Counter Use ______ |
| (Optional Format 1-2-96) | |
| (Division Sign-Off) | |
| Division of Radiological Devices | |
| Office of In Vitro Diagnostic Device Evaluation and Safety | |
| 610K | K100847 |
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.