PARALLAX CONTOUR VERTEBRAL AUGMENTATION DEVICE

K100479 · Arthrocare Corp. · NDN · Sep 21, 2010 · Orthopedic

Device Facts

Record IDK100479
Device NamePARALLAX CONTOUR VERTEBRAL AUGMENTATION DEVICE
ApplicantArthrocare Corp.
Product CodeNDN · Orthopedic
Decision DateSep 21, 2010
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 888.3027
Device ClassClass 2
AttributesTherapeutic

Intended Use

The ArthroCare® Parallax® Contour® Vertebral Augmentation Device when used with the access needle kits are indicated for use during kyphoplasty or vertebral augmentation procedures to create a void in the vertebral body and fill the void with Parallax Acrylic Resin (bone cement). The painful pathological vertebral body compression fractures may result from osteoporosis, benign or malignant lesions such as metastatic cancers and myeloma.

Device Story

Device disrupts cancellous bone to create void in vertebral body; facilitates delivery of Parallax Acrylic Resin (PMMA bone cement) during kyphoplasty/vertebral augmentation. Used in clinical settings by physicians. Input: manual manipulation of device within vertebral body. Output: physical void creation; subsequent cement delivery. Benefits: enables increased cement volume delivery compared to standard vertebroplasty; reduces VAS pain scores in patients with compression fractures. Clinical evidence shows significant pain reduction and safe, effective void creation.

Clinical Evidence

Prospective clinical study evaluated efficacy of Contour device with PMMA cement. Results: void volume 0.33–2.02 cc; PMMA instillation 2.9–8.5 cc. Mean VAS pain score significantly reduced (p<0.01) to 2.19 ± 0.41. Four cases of asymptomatic PMMA extravasation observed; no other complications. Pre-clinical cadaveric study demonstrated increased cement delivery volume compared to standard vertebroplasty.

Technological Characteristics

Manual surgical instrument for vertebral augmentation. Components include access needle kits and bone cement delivery mechanism. Materials and mechanical performance validated via torque, insertion, withdrawal, and flexure testing. No electronic or software components; purely mechanical device.

Indications for Use

Indicated for patients with painful pathological vertebral body compression fractures resulting from osteoporosis, or benign/malignant lesions (e.g., metastatic cancers, myeloma) undergoing kyphoplasty or vertebral augmentation.

Regulatory Classification

Identification

Polymethylmethacrylate (PMMA) bone cement is a device intended to be implanted that is made from methylmethacrylate, polymethylmethacrylate, esters of methacrylic acid, or copolymers containing polymethylmethacrylate and polystyrene. The device is intended for use in arthroplastic procedures of the hip, knee, and other joints for the fixation of polymer or metallic prosthetic implants to living bone.

Special Controls

*Classification.* Class II (special controls). The special control for this device is the FDA guidance document entitled “Class II Special Controls Guidance Document: Polymethylmethacrylate (PMMA) Bone Cement.”

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ K100479 ### 510(k) Summary 2951580 SEP 2 1 2010 # ArthroCare® Corporation Parallax® Contour® Vertebral Augmentation Device #### General Information Submitter Name/Address: ArthroCare Corporation 680 Vaqueros Avenue Sunnyvale, CA 94085-3523 Director, Regulatory Affairs Valerie Defiesta-Ng 408.736.0224 February 17, 2010 Establishment Registration Number: Contact Person: Contact Phone Number: Date Prepared: Device Description Trade Name: Classification Name: Parallax® Contour® Vertebral Augmentation Device Class II Polymethylmethacrylate (PMMA) bone cement (Section 888.3027) Pro-codes NDN: Class 1 Cement dispenser (Section 888.4200) Pro-codes OAR; and Class I Orthopedic Manual Surgical Instrument (Section 888.4540) Pro-codes . HXG #### Predicate Devices Parallax Contour Osteotome Access Needle Kits A V A flex Vertebral Augmentation Needle Class 1 exempt Class I exempt K072133 {1}------------------------------------------------ #### Product Description The ArthroCare Parallax Contour Vertebral Augmentation Device is used to disrupt cancellous bone and create a void in the vertebral body and fill the void with Parallax Acrylic Resin (bone cement) during kyphoplasty or vertebral augmentation procedures. #### Intended Uses The Parallax Contour Vertebral Augmentation Device when used with the access needle kits are indicated for use during kyphoplasty or vertebral augmentation procedures to create a void in the vertebral body and fill the void with Parallax Acrylic Resin (bone cement). The painful pathological vertebral body compression fractures may result from osteoporosis, benign or malignant lesions such as metastatic cancers and myeloma. #### Substantial Equivalence In establishing substantial equivalence to the predicate device, ArthroCare compared the indications for use, performance specifications, and technology of the subject device to the predicate device. Functional performance testing of the device included torque, insertion and withdrawal, flexure, device attachment/deployment/removal and mechanical displacement of bone have been completed to demonstrate the mechanical characteristics of the device. A pre-clinical cadaveric study was conducted to evaluate the size void created by the Contour and predicate devices, as well as the volume of Parallax PMMA bone cement delivered during vertebral augmentation. This study demonstrated equivalence in performance of the Contour and predicate devices when used in cadaveric vertebral bodies. In addition, studies were also conducted to characterize Parallax bone cement volume distributed in human cadaver fractured vertebral discs. The test group used the Contour device to create a void prior to vertebral augmentation with bone cement; in the control group the Contour device was not used prior to vertebral augmentation. Comparative data between test group and the control group is reported in terms of relative fill of cement volume per vertebral body volume. Results demonstrates the Contour may be use to successfully create a void in the vertebral body, and that use of Contour device prior to cement augmentation allows significantly more cement delivery into the vertebral body compared to the standard vertebroplasty procedure. Testing was also conducted to compare the performance of the Contour and predicate devices in terms of volume of void created in simulated human foam bone blocks. Based on the results of the study, the void volumes were all similar in size, and no statistically significant differences were noted between the two devices. The pre-clinical studies demonstrate the Contour device performs equivalent to the predicate device. A clinical study was conducted to evaluate clinical efficacy of the Contour device used in conjunction with PMMA bone cement to fill voids that have been created during perculaneous vertebral augmentation. The outcome showed the volume of the void percularious vertebral body using the Contour ranged from 0.33 to 2.02 cc for individual patients; the volume of PMMA instillation ranged from 2.9 to 8.5 cc; four cases {2}------------------------------------------------ demonstrated imaging evidence of PMMA extravasation into the paravertebral veins, all four cases were asymptomatic; and after the mean follow-up period, the mean VAS pain score was significantly reduced (dependent t-test, p<0.01), where the post-procedure mean score was 2.19 +/- 0.41 points. In all cases, no patient complications were observed. The results of the study demonstrated percutaneous vertebral augmentation using the Contour device was safe and effective for treating symptomatic vertebral compression fractures. The performance testing, device comparison, pre-clinical, and clinical studies demonstrate that the subject device is substantially equivalent to the predicate device, and is safe and effective. #### Summary of Safety and Effectiveness The Parallax Contour Vertebral Augmentation Device, as described in this premarket notification 510(k), is substantially equivalent to the predicate device. The differences in performance specifications and labeling are not substantial changes or modifications, and do not significantly affect the safety or efficacy of the proposed device. {3}------------------------------------------------ Image /page/3/Picture/1 description: The image shows the logo for the Department of Health & Human Services USA. The logo is a circular seal with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" arranged around the perimeter. Inside the circle is an abstract image of an eagle with its wings spread. Food and Drug Administration 10903 New Hampshire Avenue Document Control Room -WO66-G609 Silver Spring, MD 20993-0002 ArthroCare Corporation % Ms. Valerie Defiesta-Ng Director, Regulatory Affairs 680 Vaqueros Avenue Sunnyvale, California 94085 SEP 2 1 2010 Re: K100479 Trade/Device Name: ArthroCare® Parallax® Contour® Vertebral Augmentation Device Regulation Number: 21 CFR 888.3027 Regulation Name: Polymethylmethacrylate (PMMA) bone cement Regulatory Class: Class II Product Code: NDN, OAR, HXG Dated: August 18, 2010 Received: August 19, 2010 Dear Ms. Defiesta-Ng: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you; however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must {4}------------------------------------------------ Page 2 - Ms. Valerie Defiesta-Ng comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm fart the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. https://www.fda.gov/MedicalDevices/ResourcestorYou/Industry/default.htm Sincerely yours, Barbav. Buetmo Mark N. Melkerson Director Division of Surgical, Orthopedic And Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {5}------------------------------------------------ ## Indications for Use Statement | Device Name | ArthroCare® Parallax® Contour® Vertebral Augmentation Device | |---------------|--------------------------------------------------------------| | 510(k) Number | K062439 | רדרטשו א 510(k) Number: Indications for Use: The ArthroCare® Parallax® Contour® Vertebral Augmentation Device when used with the access needle kits are indicated for use during kyphoplasty or vertebral augmentation procedures to create a void in the vertebral body and fill the void with Parallax Acrylic Resin (bone cement). The painful pathological vertebral body compression fractures may result from osteoporosis, benign or malignant lesions such as metastatic cancers and myeloma. PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Prescription Use (Per 21 CFR 801.109) OR X Over-the-Counter Use Division Sign-Off (Division Sign-Off) Division of Surgical, Orthopedic, and Restorative Devices 510(k) Number K100479
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%