FOOTPRINT MEDICAL PERIPHERALLY INSERTED CENTRAL CATHETER

K093252 · Footprint Medical, Inc. · LJS · Dec 17, 2009 · General Hospital

Device Facts

• Record ID: K093252
• Device Name: FOOTPRINT MEDICAL PERIPHERALLY INSERTED CENTRAL CATHETER
• Applicant: Footprint Medical, Inc.
• Product Code: LJS · General Hospital
• Decision Date: Dec 17, 2009
• Decision: SESE
• Submission Type: Special
• Regulation: 21 CFR 880.5970
• Device Class: Class 2
• Attributes: Therapeutic, Pediatric

Intended Use

This product is intended for use in the neonatal and small pediatric patient. PICC Catheters are indicated when: medications, TPN nutritional solutions, and intravenous infusion of fluids are needed.

Device Story

Peripherally Inserted Central Catheter (PICC) designed for neonatal and small pediatric patients. Device provides venous access for administration of medications, TPN, and fluids. Used in clinical settings by healthcare professionals. Functions as a long-term intravascular conduit. Benefits include reliable venous access for patients requiring extended therapy.

Clinical Evidence

Bench testing only.

Technological Characteristics

Percutaneous, implanted, long-term intravascular catheter. Class II device (21 CFR 880.5970). Product code LJS.

Indications for Use

Indicated for neonatal and small pediatric patients requiring intravenous administration of medications, TPN nutritional solutions, and fluids.

Regulatory Classification

Identification

A percutaneous, implanted, long-term intravascular catheter is a device that consists of a slender tube and any necessary connecting fittings, such as luer hubs, and accessories that facilitate the placement of the device. The device allows for repeated access to the vascular system for long-term use of 30 days or more, and it is intended for administration of fluids, medications, and nutrients; the sampling of blood; and monitoring blood pressure and temperature. The device may be constructed of metal, rubber, plastic, composite materials, or any combination of these materials and may be of single or multiple lumen design.

Special Controls

*Classification.* Class II (special controls) Guidance Document: “Guidance on Premarket Notification [510(k)] Submission for Short-Term and Long-Term Intravascular Catheters.”

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle or bird with three human profiles incorporated into its design.

Food and Drug Administration 10903 New Hampshire Avenue Document Control Room W-O66-0609 Silver Spring, MD 20993-0002

Mr. Clyde N. Baker Regulatory Manager Footprint Medical, Incorporated 1203 Camden Street San Antonio, Texas 78215

# DEC 1 7 2009

Re: K093252

Trade/Device Name: Peripherally Inserted Central Catheter Regulation Number: 21 CFR 880.5970 Regulation Name: Percutaneous, Implanted, Long-Term Intravascular Catheter Regulatory Class: II Product Code: LJS Dated: November 16, 2009 Received: November 20, 2009

Dear Mr. Baker:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{1}------------------------------------------------

### Page 2- Mr. Baker

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH /CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.

You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers. International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm.

Sincerely,

Susan Reiner

Anthony D. Watson, B.S., M.S., M.B.A. Director

Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and

### Radiological Health

#### Enclosure

{2}------------------------------------------------

Image /page/2/Picture/0 description: The image shows the logo for Footprint medical inc. The word "Footprint" is written in a bold, sans-serif font, with a small footprint graphic above the "i" in "print". Below the word "Footprint" is the text "medical inc." in a smaller font. The logo is simple and professional, and the footprint graphic adds a touch of personality.

# INDICATIONS FOR USE STATEMENT

### 510(K) NUMBER:

K- 093252

#### DEVICE NAME: FOOTPRINT MEDICAL, INC., PERIPHERALLY INSERTED CENTRAL CATHETER

### INDICATIONS FOR USE:

This product is intended for use in the neonatal and small pediatric patient. PICC Catheters are indicated when: medications, TPN nutritional solutions, and intravenous infusion of fluids are needed.

## CONCURRENCE OF CDRH, OFFICE OF DEVICE EVALUATION

Ch. Ei. 9

(Division Sign-Off) Division of Anesthesiology, General Hospital Infection Control, Dental Devices

510(k) Number: _______________________________________________________________________________________________________________________________________________________________

PRESCRIPTION USE XX (per 21 CFR 801.109)

OR

Over The Counter Use