HOT DOG PATIENT WARMING MATTRESS SYSTEM, MODELS WCUB, M101, M102 AND M103

K092807 · Augustine Biomedical & Design, LLC · DWJ · Dec 10, 2009 · Cardiovascular

Device Facts

Record IDK092807
Device NameHOT DOG PATIENT WARMING MATTRESS SYSTEM, MODELS WCUB, M101, M102 AND M103
ApplicantAugustine Biomedical & Design, LLC
Product CodeDWJ · Cardiovascular
Decision DateDec 10, 2009
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 870.5900
Device ClassClass 2
AttributesTherapeutic

Intended Use

The Hot Dog Patient Warming Mattress System is intended to prevent or treat hypothermia and to provide warmth to patients. The Hot Dog Patient Warming Mattress should be used in circumstances in which patients may not maintain a state of normothermia. The mattress includes a pressure relieving pad. The System is intended primarily for use in hospitals and surgical centers including without limitation operating, recovery and emergency rooms and on medical/surgical floors.

Device Story

Hot Dog Patient Warming Mattress System consists of temperature control unit and warming mattress; mattress features conductive polymer-coated fabric heater encased in polymer shell with integrated pressure-relieving foam pad. Device used in hospitals/surgical centers (OR, recovery, ER, medical/surgical floors) by clinicians to prevent/treat hypothermia. Control unit monitors/regulates mattress temperature to maintain patient normothermia. Provides thermal support to patients unable to maintain body temperature; pressure-relieving pad aids in patient comfort/safety.

Clinical Evidence

Bench testing only. No clinical data required. Performance verified against IEC 60601-1, IEC 60601-1-2, IEC 60601-1-4, and IEC 60601-2-35 standards.

Technological Characteristics

Conductive polymer-coated fabric heater; polymer shell; pressure-relieving foam pad. Electrical heating system with temperature control unit. Standards: IEC 60601-1 (safety), IEC 60601-1-2 (EMC), IEC 60601-1-4 (programmable electrical medical systems), IEC 60601-2-35 (heating blankets/pads/mattresses).

Indications for Use

Indicated for patients at risk of or experiencing hypothermia requiring maintenance of normothermia in hospital and surgical settings (operating, recovery, emergency rooms, medical/surgical floors).

Regulatory Classification

Identification

A thermal regulating system is an external system consisting of a device that is placed in contact with the patient and a temperature controller for the device. The system is used to regulate patient temperature.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ 16092807 ### Section 5 Premarket 510k Summary Submitter Information: Augustine Biomedical & Design, LLC 6581 City West Parkway Eden Prairie, MN 55344 952.465.3500 DEC 10 2009 James D. Ecklein, Director RA/QA Contact: Date Prepared: December 10, 2009 Trade Name Hot Dog Patient Warming Mattress System Model Numbers: WCUB, M101, M102, M103 DWJ (21 CFR Part 870.5900) Product Code Thermal Regulating System Common Name > Inditherm Patient Warming System - K051419 Hot Dog Patient Warming System - K052392 Bair Hugger Patient Warming System Model 505 - K960167 Bair Hugger Patient Warming System Model 750 - K001149 Device Description The Hot Dog Patient Warming Mattress System consists of a temperature control unit that monitors and controls the temperature of a patient warming mattress. The mattress is composed of a conductive polymer coated fabric heater encased in a polymer shell. The mattress also contains a pressure relieving foam pad. The Hot Dog Patient Warming Mattress System is intended to Intended Use prevent or treat hypothermia and to provide warmth to patients. The Hot Dog Patient Warming Mattress should be used in circumstances in which patients may not maintain a state of normothermia. The mattress includes a pressure relieving pad. The System is intended primarily for use in hospitals and surgical centers including without limitation operating, recovery and emergency rooms and on medical/surgical floors. Technological Characteristics Non Clinical Data Predicate Device A comparison between the new and predicate devices shows that the technological characteristics and indications for use are equivalent. The products have similar designs, materials, components and dimensions. Bench testing was performed to demonstrate that the proposed warming mattress system is substantially equivalent to the predicate devices. Temperature characteristics, pressure relief characteristics and safety systems were compared and found to be > Page 1 of 2 Updated Premarket Summary K092807 12/10/09 {1}------------------------------------------------ ## Section 5 Premarket 510k Summary comparable. The mattress system is designed to meet the following performance standards: IEC 60601-1 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance, edition: IEC 60601-1-2, Medical Electrical Equipment - Part 1-2: General Requirements for Safety - Collateral standard: Electromagnetic Compatibility - Requirements and Tests, edition . IEC 60601-1-4:2000, Medical electrical equipment - Part 1: General requirements for safety - 4 - Collateral standard: Programmable electrical medical systems, edition 1.1. IEC 60601-2-35 Particular requirements for the safety of blankets, pad and mattresses intended for heating in medical use Clinical Data Conclusion ﺮ ﺍﻟﻤﺪﻳﻨﺔ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤ #### Not required The Hot Dog Patient Warming Mattress System was found to be equivalent to the predicate devices in technological characteristics and indications for use. {2}------------------------------------------------ #### DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/2/Picture/17 description: The image shows the logo for the Department of Health & Human Services - USA. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized image of an eagle with its wings spread, depicted with three curved lines representing the wings and body. Food and Drug Administration 10903 New Hampshire Avenue Document Mail Center - WO66-G609 Silver Spring, MD 20993-0002 1 Augustine Biomedical & Design LLC c/o Mr. James D. Ecklein Director RA/QA 6581 City West Parkway Eden Prairie, MN 55344 ### DEC 1 0 2009 K092807 Re: Hot Dog Patient Warming Mattress System, Model Numbers: WCUB, M101, M102, M103 Regulation Number: 21 CFR 870.5900 Regulation Name: Thermal Regulating System Regulatory Class: Class II (two) Product Code: DWJ Dated: August 31, 2009 Received: September 11, 2009 Dear Mr. Ecklein: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The r ou may, merelors, mans of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {3}------------------------------------------------ Page 2 - Mr. James D. Ecklein Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ncm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Sincerely yours, R. h. huel. Image /page/3/Picture/7 description: The image shows a signature or symbol that appears to be handwritten. To the right of the symbol are the words "Bra" and "Dir", stacked vertically. The symbol itself consists of a curved line that forms a loop at the top, with a more angular, wave-like line extending downwards from the loop. Bram D. Zuckerman, M.D. Director Division of Cardiovascular Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ # Indications for Use Statement 510(k) Number (if known): K092807 Device Name: Hot Dog Patient Warming Mattress System Indications For Use: The Hot Dog Patient Warming Mattress System is intended to prevent or treat hypothermia and to provide warmth to patients. The Hot Dog Patient Warming Mattress should be used in circumstances in which patients may not maintain a state of normothermia. The mattress includes a pressure relieving pad. The System is intended primarily for use in hospitals and surgical centers including without limitation operating, recovery and emergency rooms and on medical/surgical floors. Prescription Use × (Part 21 CFR 801 Subpart D) AND/OR Over-The-Counter Use (21 CFR 801 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Dma D. leliner (Division Sign-Off) Division of Cardiovascular Devices 510(k) Number दिल्लूट रूप न
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%