OCCLUFAST CAD

K080130 · Zhermack S.P.A. · ELW · Mar 14, 2008 · Dental

Device Facts

• Record ID: K080130
• Device Name: OCCLUFAST CAD
• Applicant: Zhermack S.P.A.
• Product Code: ELW · Dental
• Decision Date: Mar 14, 2008
• Decision: SESE
• Submission Type: Special
• Regulation: 21 CFR 872.3660
• Device Class: Class 2

Intended Use

Zhermack OCCLUFAST CAD is a dental impression material intended to be placed on a dental patient's teeth for bite registration to reproduce the structure of a patient's teeth to provide models for study or for production of restorative prosthetic devices. Occlufast CAD has been developed for use with CAD/CAM systems.

Device Story

Occlufast CAD is a dental impression material used for bite registration. Applied by dental professionals to patient teeth to capture occlusal structure; material sets to create a physical impression. Designed specifically for compatibility with CAD/CAM systems, facilitating the creation of digital models for restorative dentistry. Used in clinical dental settings to assist in the fabrication of prosthetic devices.

Clinical Evidence

Bench testing only.

Technological Characteristics

Addition-cured silicone (vinyl polysiloxane) dental impression material. Designed for high-precision bite registration suitable for optical scanning in CAD/CAM workflows. Supplied as a two-component system for mixing.

Indications for Use

Indicated for dental patients requiring bite registration to reproduce tooth structure for study models or restorative prosthetic devices. Compatible with CAD/CAM systems.

Regulatory Classification

Identification

Impression material is a device composed of materials such as alginate or polysulfide intended to be placed on a preformed impression tray and used to reproduce the structure of a patient's teeth and gums. The device is intended to provide models for study and for production of restorative prosthetic devices, such as gold inlays and dentures.

Special Controls

*Classification.* Class II (Special Controls).

Submission Summary (Full Text)

{0}------------------------------------------------

## DEPARTMENT OF HEALTH & HUMAN SERVICES

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle-like symbol with three curved lines representing wings or feathers. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" is arranged in a circular pattern around the symbol.

## Public Health Service

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

## MAR 1 4 2008

Zhermack SpA C/O Mr. Gerald W. Shipps Regulatory Affairs Consultant Cascades Device Consulting Associates 19379 Blue Lake Loop Bend, Oregon 97702

Re: K080130

Trade/Device Name: Occlufast® CAD Regulation Number: 21 CFR 872.3660 Regulation Name: Impression Material Regulatory Class: II Product Code: ELW Dated: January 17, 2008 Received: January 18, 2008

Dear Mr. Shipps:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{1}------------------------------------------------

Page 2- Mr. Shipps

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours.

Snytte Y. Michiein Davis.

Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

| <b>Zhermack</b><br><i>BEYOND INNOVATION</i> |
|---------------------------------------------|
|---------------------------------------------|

| | 2 | INDICATIONS FOR USE |
|--|---|---------------------|
|--|---|---------------------|

| 510(k) Number (if known): | K080130 |
|---------------------------|---------|
|---------------------------|---------|

Device Name: OCCLUFAST CAD

Indications for Use: Zhermack OCCLUFAST CAD is a dental impression material intended to be placed on a dental patient's teeth for bite registration to reproduce the structure of a patient's teeth to provide models for study or for production of restorative prosthetic devices.

Occlufast CAD has been developed for use with CAD/CAM systems.

Prescription Use______________________________________________________________________________________________________________________________________________________________ AND/OR

Over-The-Counter Use

(Part 21 CFR 801 Subpart D)

(21 CFR 807 Subpart C)

## (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Page 1 of 1

Susan Runner

Division Sign-Off) ivision of Anesthesiology, General Hospital fection Control, Dental Devices

KOXOBD________________________________________________________________________________________________________________________________________________________________________ 10(k) Number: __

OCCLUFAST CAD Rev. 1 Mar. 12, 2008