MAXPLUS TRU-SWAB POSITIVE DISPLACEMENT CONNECTOR

K072542 · Medegen Medical Manufacturing System · FPA · Sep 25, 2007 · General Hospital

Device Facts

• Record ID: K072542
• Device Name: MAXPLUS TRU-SWAB POSITIVE DISPLACEMENT CONNECTOR
• Applicant: Medegen Medical Manufacturing System
• Product Code: FPA · General Hospital
• Decision Date: Sep 25, 2007
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 880.5440
• Device Class: Class 2
• Attributes: Therapeutic, 3rd-Party Reviewed

Intended Use

The MaxPlus is a sterile single patient use Positive Displacement Connector for needleless access to the IV line and/or IV catheter during IV therapy. The MaxPlus connector can be used for direct injection, intermittent infusion, continuous infusion or aspiration.

Device Story

MaxPlus Tru-Swab is a sterile, single-patient-use positive displacement connector. It provides needleless access to IV lines or catheters. Used by clinicians for direct injection, intermittent infusion, continuous infusion, or aspiration. Device facilitates fluid delivery and blood withdrawal while maintaining closed system access. Benefits include reduced needle-stick risk and maintenance of catheter patency during IV therapy.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Positive displacement connector for needleless IV access. Sterile, single-patient-use design. Mechanical fluid path component.

Indications for Use

Indicated for needleless access to IV lines or IV catheters for patients requiring IV therapy, including direct injection, intermittent infusion, continuous infusion, or aspiration.

Regulatory Classification

Identification

An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container.

Special Controls

*Classification.* Class II (special controls). The special control for pharmacy compounding systems within this classification is the FDA guidance document entitled “Class II Special Controls Guidance Document: Pharmacy Compounding Systems; Final Guidance for Industry and FDA Reviewers.” Pharmacy compounding systems classified within the intravascular administration set are exempt from the premarket notification procedures in subpart E of this part and subject to the limitations in § 880.9.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized caduceus symbol, which is a staff with two snakes coiled around it, and the text "DEPARTMENT OF HEALTH & HUMAN SERVICES-USA" arranged in a circular fashion around the symbol. The logo is black and white.

SEP 2 5 2007

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Medegen Medical Manufacturing System C/O Mr. Mark Job Responsible Third Party Official Regulatory Technology Service LLC 1394 25" Street, NW Buffalo, Minnesota 55313

Re: K072542

Trade/Device Name: MaxPlus™ Tru-Swab™ Positive Displacement Connector Regulation Number: 880.5440 Regulation Name: Intravascular Administration Set Regulatory Class: II Product Code: FPA Dated: September 8, 2007 Received: September 10, 2007

Dear Mr. Job:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{1}------------------------------------------------

Page 2 -- Mr. Job

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely vours.

Clive

Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

KOJ2542 510(k) Number (if known): _

Device Name: MaxPlus™ Tru-Swab™ Positive Displacement Connector.

Indications for Use:

The MaxPlus is a sterile single patient use Positive Displacement Connector for needleless access to the IV line and/or IV catheter during IV therapy. The MaxPlus connector can be used for direct injection, intermittent infusion, continuous infusion or aspiration.

## (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

| (Division Sign-Off) | |
|---------------------------------------------------------------------------------|---------|
| Division of Anesthesiology, General Hospital, Infection Control, Dental Devices | |
| 510(k) Number: | K472542 |

| Prescription Use (Per 21 CFR 801.109) | |
|---------------------------------------|--|
|---------------------------------------|--|

OR

| Over-The-Counter Use | |
|----------------------|--|
|----------------------|--|

(Optional Format 1-2-96)

Section 3-2