ATLANTIS ABUTMENT FOR 3I CERTAIN MICRO MINI; GEMINI AND GEMINI+ ABUTMENT

K062197 · Atlantis Components, Inc. · NHA · Feb 28, 2007 · Dental

Device Facts

• Record ID: K062197
• Device Name: ATLANTIS ABUTMENT FOR 3I CERTAIN MICRO MINI; GEMINI AND GEMINI+ ABUTMENT
• Applicant: Atlantis Components, Inc.
• Product Code: NHA · Dental
• Decision Date: Feb 28, 2007
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.3630
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

The Atlantis Abutment is intended for use as an accessory to an endosseous implant to support a prosthetic device in a partially or completely edentulous patient. It is intended for use to support single and multiple tooth prosthesis, in the mandible or maxilla. The prosthesis can be cement retained to the abutment. The abutment screw is intended to secure the abutment to the endosseous implant. The Atlantis Abutment for 3i Certain MicroMini Implant is compatible with 3i Osseotite NT® Certain and Parallel Walled Implants both with 3.25 mm diameters. Please note: This device may be used in an early load situation, but is dependent on the specific implant system and protocol used by the dental professional. Highly angled abutments (i.e. 30 degrees) on implants with diameters less than 4 mm are intended for the anterior region of the mouth and are not intended for the posterior region due to limited strength of the implant fixture.

Device Story

Atlantis Abutment for 3i Certain MicroMini Implant; endosseous dental implant abutment; provides support for cement-retained prosthetic restorations. Device placed over implant shoulder; secured via abutment screw. Used by dental professionals in clinical settings. Benefits include restoration of function in edentulous patients. Highly angled abutments (30 degrees) restricted to anterior region for implants <4mm diameter.

Clinical Evidence

No clinical data. Substantial equivalence based on design, material, and performance characteristics compared to predicate devices.

Technological Characteristics

Material: Titanium grade Ti-6Al-4V ELI (ASTM F-136). Form factor: Endosseous dental implant abutment with screw. Compatibility: 3i Osseotite NT Certain and Parallel Walled Implants (3.25mm diameter).

Indications for Use

Indicated for partially or completely edentulous patients requiring single or multiple tooth prosthetic support in the mandible or maxilla. Compatible with 3i Osseotite NT Certain and Parallel Walled Implants (3.25mm diameter). Contraindicated for highly angled abutments (30 degrees) on implants <4mm diameter in the posterior region due to limited fixture strength.

Regulatory Classification

Identification

An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation.

Special Controls

*Classification.* Class II (special controls). The guidance document entitled “Class II Special Controls Guidance Document: Root-Form Endosseous Dental Implants and Endosseous Dental Implant Abutments” will serve as the special control. (See § 872.1(e) for the availability of this guidance document.)

Predicate Devices

• Atlantis Abutment and Abutment Screw (K981858)
• Atlantis Abutment for 3i Certain Implant (K051011)
• 3i Osseotite NT Dental Implants (K014235)

Submission Summary (Full Text)

{0}------------------------------------------------

Pre-market Notification Page - 0009 - - - - - - - - - - - - - - - - -

FEB 2 8 2007

# VII. SECTION 10 - 510(K) SUMMARY

This summary of 510(k) substantial equivalence information is being submitted in accordance with the requirements of 21 CFR Part 807.92.

#### 1. Applicant's Name and Address

Atlantis Components Inc. 25 First Street Cambridge, Massachusetts 02141 Telephone Number: 617-661-9799 Fax Number: 617-661-9063 Contact Person: Franklin Uyleman Manager of Quality and Regulatory Affairs

#### 2. Name of Device

·

| Trade Name: | AtlantisTM Abutment for 3i CertainTM MicroMini<br>Implant |
|----------------------|------------------------------------------------------------------------|
| Common Name: | Endosseous dental implant abutment |
| Classification Name: | Endosseous dental implant abutment<br>21 CFR 872.3630 Product code NHA |

### Legally Marketed Device to which Equivalence is claimed (Predicate Device) 3.

| Manufacturer | Device | 510(k)<br>Number |
|-----------------------------|---------------------------------------------|------------------|
| Atlantis Components<br>Inc. | Atlantis Abutment and Abutment<br>Screw | K981858 |
| Atlantis Components<br>Inc. | Atlantis Abutment for 3i Certain<br>Implant | K051011 |
| 3i Implant Innovations | Osseotite NT Dental Implants | K014235 |

#### 4. Description of the Device

The devices covered in this submission are abutments which are placed into the dental implant to provide support for a prosthetic restoration. The subject abutments are indicated for cemented restorations.

{1}------------------------------------------------

Pre-market Page -00010 --------------------

#### 4. Description of the Device (continued)

The Atlantis™ Abutments for 3i Certain™ MicroMini Implant and abutment screws are made from Titanium grade Ti-6A1-4V ELI (Meets ASTM Standard F-136). The abutment is placed over the implant shoulder and is mounted into the implant with a screw. The abutments are compatible with 3i Osseotite NT® Certain™ and Parallel Walled Implants both with a 3.25mm diameter.

#### Intended Use of the Device 5.

The devices covered by this submission are abutments which are placed into a dental implant to provide support for a prosthetic reconstruction. The Atlantis Abutment is intended for use as an accessory to an endosseous implant to support a prosthetic device in a partially or completely edentulous patient. It is intended for use to support single and multiple tooth prosthesis, in the mandible or maxilla. The prosthesis can be cevent retained to the abutment. The abutment screw is intended to secure the abutment to the endosseous implant.

Please Note, highly angled abutments (i.e. 30 degrees) on implants with diameters less than 4 mm are intended for the anterior region of the mouth and are not intended for the posterior region due to the limited strength of the implant fixture.

#### 6. Basis for Substantial Equivalence

The Atlantis™ Abutments for 3i Certain MicroMini Implants are substantially equivalent in intended use, material, design and performance to the Atlautis Abutments cleared under K981858, the Atlantis Abutment for 3i Certain Implants clear under K051011 and 3i Osseotite NT Dental Implants cleared under K014235.

{2}------------------------------------------------

### DEPARTMENT OF HEALTH & HUMAN SERVICES

Image /page/2/Picture/1 description: The image shows the seal of the Department of Health and Human Services (HHS). The seal features a stylized eagle with three legs, representing the department's mission to protect the health of all Americans and provide essential human services. The words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" are arranged in a circular pattern around the eagle.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Atlantis Components, Incorporated C/O Ms. Betsy A. Brown Consultant B.A. Brown & Associates 8944 Tamaroa Terrace Skokie, Illinois 60076

Rc: K062197

Trade/Device Name: Atlantis™ Abutment for 3i Certain™ MicroMini Implant Regulation Number: 872.3630 Regulation Name: Endosseous Dental Implant Abutment Regulatory Class: II Product Code: NHA Dated: February 6, 2007 Reccived: February 12, 2007

-1-1 3 8 2007

Dear Ms. Brown:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{3}------------------------------------------------

Page 2 -- Ms. Brown

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal egencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice. requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, parmits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours,

Susan Junren

Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{4}------------------------------------------------

Pre-market Notification Page - 00227

# Indications for Use

510(k) Number (if Known) KO6Z197

Device Name: Atlantis ™ Abutment for 3i Certain™ MicroMini Implant

Indication for Use:

The Atlantis Abutment is intended for use as an accessory to an endosseous implant to support a prosthetic device in a partially or completely edentulous patient. It is intended for use to support single and multiple tooth prosthesis, in the mandible or maxilla. The prosthesis can be cement retained to the abutment. The abutment screw is intended to secure the abutment to the endosseous implant.

The Atlantis Abutment for 3i Certain MicroMini Implant is compatible with 3i Osseotite NT® Certain and Parallel Walled Implants both with 3.25 mm diameters.

Please note: This device may be used in an early load situation, but is dependent on the specific implant system and protocol used by the dental professional. Highly angled abutments (i.e. 30 degrees) on implants with diameters less than 4 mm are

intended for the anterior region of the mouth and are not intended for the posterior region due to limited strength of the implant fixture.

Susan Runser

Prescription Use (Part 21 CFR 801 SubpartD)

AND/OR

Over-The-Counter Use (21 CFR 801 Subpart C)

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)