VITA PM 7 (20 GRAM BOTTLES), VITA PM 7 (50 GRAM BOTTLES)

K050362 · Vident · EIH · Mar 15, 2005 · Dental

Device Facts

• Record ID: K050362
• Device Name: VITA PM 7 (20 GRAM BOTTLES), VITA PM 7 (50 GRAM BOTTLES)
• Applicant: Vident
• Product Code: EIH · Dental
• Decision Date: Mar 15, 2005
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.6660
• Device Class: Class 2

Intended Use

Vita PM7 pressable ceramic is to be used for the fabrication of - Single and multi-surface inlays - Onlays - Veneers - Partial crowns - Anterior crowns - Premolar crowns Also for oxide-ceramic crown and bridge substructures to be veneered with conventional porcelain. For use by or on the order of a dental professional such as DDS or DMD. Not for use by the general public or OTC.

Device Story

Vita PM7 Pressable Ceramic is a dental restorative material used by dental professionals (DDS/DMD) in clinical or laboratory settings. It is processed via pressing techniques to create dental prosthetics, including inlays, onlays, veneers, and crowns. The material serves as a base for restorations or as a substructure for oxide-ceramic crowns and bridges, which are subsequently veneered with conventional porcelain. The device provides a durable, aesthetic ceramic framework for tooth replacement or repair, aiding in the restoration of dental function and appearance.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Pressable ceramic material for dental restorations. Classified under 21 CFR 872.6660 (Porcelain Powder for Clinical Use). Product code EIH.

Indications for Use

Indicated for dental professionals (DDS/DMD) to fabricate single/multi-surface inlays, onlays, veneers, partial crowns, anterior crowns, premolar crowns, and oxide-ceramic crown/bridge substructures for veneering. Not for OTC use.

Regulatory Classification

Identification

Porcelain powder for clinical use is a device consisting of a mixture of kaolin, felspar, quartz, or other substances intended for use in the production of artificial teeth in fixed or removable dentures, of jacket crowns, facings, and veneers. The device is used in prosthetic dentistry by heating the powder mixture to a high temperature in an oven to produce a hard prosthesis with a glass-like finish.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the Department of Health & Human Services - USA. The logo is circular and contains the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle with three lines representing its wings.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

MAR 1 2005

Ms. Barbara J. Lewandowski Regulatory Affairs Specialist VIDENT Incorporated 3150 East Birch Street Brea, California 92821

Re: K050362

Trade/Device Name: Vita PM7 Pressable Ceramic Regulation Number: 21 CFR 872.6660 Regulation Name: Porcelain Powder for Clinical Use Regulatory Class: II Product Code: EIH Dated: January 30, 2005 Received: February 14, 2005

Dear Ms. Lewandowski:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{1}------------------------------------------------

## Page 2 - Ms. Barbara J. Lewandowski

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours,

Clare

Chiu S. Lin. PhD Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

## Indications for Use

## 510(k) Number (if known): K050362

Device Name: Vita PM7 Pressable Ceramic Indications for Use:

Vita PM7 pressable ceramic is to be used for the fabrication of

- Single and multi-surface inlays O
- Onlays o
- Veneers O
- Partial crowns ্
- Anterior crowns 0
- Premolar crowns o

Also for oxide-ceramic crown and bridge substructures to be veneered with conventional porcelain.

For use by or on the order of a dental professional such as DDS or DMD. Not for use by the general public or OTC.

× Prescription Use (21 CFR Part 801 Subpart D) AND/OR

Over-The-Counter Use (21 CFR Part 807 Subpart C)

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Suan Runez

ுரமா Sign-Oif) Fion of Anesthesiology. General Hospital, reation Control. Dental Devices KOSBION

The Number ____

Page 1 of ____________________________________________________________________________________________________________________________________________________________________