ATB ALL-TERRAIN BALLOON PTA DILATATION CATHETER

K022552 · Cook, Inc. · DQY · Sep 27, 2002 · Cardiovascular

Device Facts

• Record ID: K022552
• Device Name: ATB ALL-TERRAIN BALLOON PTA DILATATION CATHETER
• Applicant: Cook, Inc.
• Product Code: DQY · Cardiovascular
• Decision Date: Sep 27, 2002
• Decision: SESE
• Submission Type: Special
• Regulation: 21 CFR 870.1250
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

For percutaneous transluminal angioplasty of lesions in peripheral arteries including iliac, renal, popliteal, infrapopliteal, femoral and ilio femoral and are also intended to treat obstructive lesions of native or synthetic arteriovenous dialysis fistulae.

Device Story

ATB All-Terrain Balloon PTA Dilatation Catheter is an over-the-wire balloon catheter used for percutaneous transluminal angioplasty. Device is inserted into peripheral arteries or arteriovenous dialysis fistulae to dilate narrowed or obstructed vessels. Operated by physicians in clinical settings. Input is manual guidance via 0.035-inch guidewire; output is mechanical dilation of vessel lumen via balloon inflation. Benefits include restoration of blood flow in peripheral vasculature and maintenance of dialysis access patency.

Clinical Evidence

Bench testing only. Testing included tensile tests, balloon deflation tests, balloon burst tests, balloon compliance, balloon fatigue tests, accelerated aging tests, and biocompatibility tests. No clinical data provided.

Technological Characteristics

Over-the-wire balloon catheter; 5.0 French nylon tubing; compatible with 0.035-inch guidewire. Supplied sterile for single use. Mechanical dilation principle.

Indications for Use

Indicated for patients requiring percutaneous transluminal angioplasty of peripheral artery lesions (iliac, renal, popliteal, infrapopliteal, femoral, iliofemoral) and treatment of obstructive lesions in native or synthetic arteriovenous dialysis fistulae.

Regulatory Classification

Identification

A percutaneous catheter is a device that is introduced into a vein or artery through the skin using a dilator and a sheath (introducer) or guide wire.

Submission Summary (Full Text)

{0}------------------------------------------------

Special 510(k) Premarket Notification Balloon Catheter OOK INCORPORATED

SEP 2 7 2002

# 510(k) Summary

## Submitted By:

Karen Bradburn. RAC Requlatory Affairs Coordinator Cook Incorporated 750 Daniels Way, PO Box 489 Bloominaton. IN 47402 812-339-2235 August 1. 2002

## Device:

Trade Name:

ATB™ All-Terrain Balloon™ PTA Dilatation Catheter Proposed Classification: Catheter, Angioplasty, Peripheral, Transluminal (74 LIT)

## Predicate Devices:

The ATB™ All-Terrain Balloon™ PTA Dilatation Catheter is similar in terms of intended use, materials of constructions and technological characteristics to predicate devices reviewed as devices for transluminal percutaneous angioplasty of vessel lumens which are narrowed or obstructed.

# Device Description:

The ATB™ All-Terrain Balloon™ PTA Dilatation Catheter is an over-the wire balloon catheter indicated for percutaneous transluminal angioplasty of lesions in peripheral arteries including iliac, renal, popliteal, infrapopliteal, femoral and ilio femoral and are also intended to treat obstructive lesions of native or synthetic arteriovenous dialysis fistulae. The device will be made with 5.0 French nylon tubing compatible with an 0.035-inch quidewire. It will be supplied sterile. intended for one-time use.

#### Substantial Equivalence:

This device will be manufactured according to specified process controls and a Quality Assurance Program. This device will undergo packaging similar to the devices currently marketed and distributed by Cook Incorporated. This device will undergo sterilization similar to the devices currently marketed and distributed. Being similar with respect to indications for use, materials and physical construction to predicate devices, this device meets the requirements for section 510(k) substantial equivalence.

{1}------------------------------------------------

### Test Data:

The ATB™ All-Terrain Balloon™ PTA Dilatation Catheter was subjected to the following tests to assure reliable design and performance under the specified testing parameters. These tests were comprised of:

- 1. Tensile tests
- 2. Balloon deflation tests
- 3. Balloon burst tests
- 4. Balloon compliance
- Balloon fatigue tests ട.
- 6. Accelerated aging tests
- 7. Biocompatibility tests

The results of these tests provide reasonable assurance that the device has been designed and tested to assure conformance to the requirements for its use as a PTA dilatation balloon catheter.

{2}------------------------------------------------

Image /page/2/Picture/1 description: The image shows the seal of the Department of Health & Human Services - USA. The seal is circular and contains the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of three human profiles facing right, with flowing lines representing hair or clothing. The image is in black and white.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

SEP 2 7 2002

Cook Incorporated c/o Ms. Karen Bradburn P.O. Box 489 Bloomington, IN 47402-0489

Re: K022552 PTA Balloon Catheter Regulation Number: 870.1250 Regulation Name: Percutaneous Catheter Regulatory Class: Class II (two) Product Code: DQY Dated: September 13, 2002 Received: September 16, 2002

Dear Ms. Bradburn:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA), You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition. FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must

{3}------------------------------------------------

# Page 2 - Ms. Karen Bradburn

comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html

Sincerely vours.

Юлятин

am D. Zuckerman, M.D. Director Division of Cardiovascular Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{4}------------------------------------------------

Special 510(k) Premarket Notlfication PTA Balloon Catheter COOK INCORPORATED

510(k) Number (if known):

PTA Balloon Catheter Device Name:

Indications for Use:

For percutaneous transluminal angioplasty of lesions in peripheral arteries including iliac, renal, popliteal, infrapopliteal, femoral and ilio femoral and are also intended to treat obstructive lesions of native or synthetic arteriovenous dialysis fistulae.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED:

Concurrence of CDRH, Office of Device Evaluation (ODE)

Prescription Use (Per 21 CFR 801.109) OR

Over-the-Counter Use_

Division Of Cardiovascular & Respiratory Devices
510(k) Number 5023552