ADMIRA SEAL

K021842 · Voco GmbH · EBC · Jul 29, 2002 · Dental

Device Facts

Record IDK021842
Device NameADMIRA SEAL
ApplicantVoco GmbH
Product CodeEBC · Dental
Decision DateJul 29, 2002
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3765
Device ClassClass 2
AttributesTherapeutic

Intended Use

Sealing/filling of pits and fissures as well as small cavities ● Sealing/facing of damaged enamel surfaces ● Anchorage of orthodontic appliances . Sealing of composites or cement fillings . Restoration of small defects in composites and amalgam fillings ● Sealing of deciduous teeth .

Device Story

Admira Seal is a dental material used for sealing and filling pits, fissures, and small cavities, as well as repairing enamel and composite/amalgam restorations. It is applied by dental professionals in a clinical setting. The material functions as a sealant or restorative agent to protect tooth surfaces and secure orthodontic appliances. It provides a physical barrier to prevent decay and restore tooth integrity.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Pit and fissure sealant and conditioner. Class II device. Product code EBC. Material properties and specific chemical composition are not detailed in the provided text.

Indications for Use

Indicated for sealing/filling pits, fissures, and small cavities; sealing/facing damaged enamel; anchoring orthodontic appliances; sealing composite/cement fillings; restoring small defects in composite/amalgam fillings; and sealing deciduous teeth.

Regulatory Classification

Identification

A pit and fissure sealant and conditioner is a device composed of resin, such as polymethylmethacrylate, intended for use primarily in young children to seal pit and fissure depressions (faults in the enamel) in the biting surfaces of teeth to prevent cavities.

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the seal of the Department of Health & Human Services (HHS) of the United States. The seal features a stylized eagle with three lines representing its wings, along with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" arranged in a circular pattern around the eagle. The seal is in black and white. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 JUL 2 9 2002 VOCO GmbH C/O Mr. Gerald W. Shipps Cascades Device Consulting Associates 19379 Blue Lake Loop Bend, Oregon 97702 Re: K021842 Trade/Device Name: Admira Seal Regulation Number: 872.3765 Regulation Name: Pit and Fissure Sealant and Conditioner Regulatory Class: II Product Code: EBC Dated: May 28, 2002 Received: June 05, 2002 Dear Mr. Shipps: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting vour device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {1}------------------------------------------------ Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act): 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus. permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html Sincerely yours, Timothy A. Ulatowski Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ ## 510(k) Number: K021842 ## Device Name: Admira Seal Indications for Use: - Sealing/filling of pits and fissures as well as small cavities ● - Sealing/facing of damaged enamel surfaces ● - Anchorage of orthodontic appliances . - Sealing of composites or cement fillings . - Restoration of small defects in composites and amalgam fillings ● - Sealing of deciduous teeth . (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PACE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) ﻤﺎ ﻳﻮﻧﻴﻮ ﺍﻟﻤﺴﺎﺣﺔ ﺍﻟﻤﺴﺘﻘﻠﺔ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤﺘﺤﺪﺓ ﺍﻟﻤ Prescription Use OR Over-The-Counter Use Rohit Shelat DDS for Dr. Susan Kummer ction Control,
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...