EXCITE SELF ETCH

K013584 · Ivoclar Vivadent, Inc. · KLE · Jan 28, 2002 · Dental

Device Facts

• Record ID: K013584
• Device Name: EXCITE SELF ETCH
• Applicant: Ivoclar Vivadent, Inc.
• Product Code: KLE · Dental
• Decision Date: Jan 28, 2002
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.3200
• Device Class: Class 2

Intended Use

Excite® Self Etch is a light cured adhesive designed to bond composite and compomer to enamel and dentin. It is also an adhesive for light initiated resin cements used in conjunction with "transparent" indirect restorations, i.e. all ceramic (except zirconiumoxide) and composite restorations. Excite Self Etch is contraindicated for use as an adhesive with self-curing resin cements. Dual curing materials must be light initiated. This product is also contraindicated for zirconiumoxide ceramic restorations and for pulp capping.

Device Story

Excite Self Etch is a light-cured dental adhesive system. It is applied by a clinician in a dental office to prepare tooth surfaces (enamel and dentin) for bonding composite or compomer restorative materials. It also functions as an adhesive for light-initiated resin cements used with transparent indirect restorations. The device facilitates the chemical and mechanical bonding of restorative materials to tooth structure, improving retention and marginal integrity. It is not intended for use with self-curing cements or zirconium oxide restorations.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Light-cured dental adhesive; chemical composition designed for bonding composite/compomer to enamel/dentin. Formulated for use with light-initiated resin cements. Contraindicated for self-curing materials and specific ceramic types (zirconium oxide).

Indications for Use

Indicated for bonding composite and compomer to enamel and dentin, and as an adhesive for light-initiated resin cements with transparent indirect restorations (all-ceramic except zirconium oxide, and composite). Contraindicated for self-curing resin cements, zirconium oxide ceramic restorations, and pulp capping.

Regulatory Classification

Identification

A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be painted on the interior of a prepared cavity of a tooth to improve retention of a restoration, such as a filling.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with three stripes representing the department's mission. The eagle is enclosed in a circle with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter.

Public Health Service

JAN 2 8 2002

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Ms. Donna M. Hartnett Assistant Corporate Counsel Ivoclar Vivadent, Incorporated 175 Pineview Drive Amherst, New York 14228

Re: K013584

Trade/Device Name: Excite Self Etch Regulation Number: 872.3200 Regulation Name: Dental Adhesive Regulatory Class: II Product Code: KLE Dated: October 22, 2001 Received: October 30, 2001

Dear Ms. Hartnett:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies.

{1}------------------------------------------------

Page 2 - Ms. Hartnett

You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html

Sincerely yours,

Timotily A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

510(k) Number (if known): Pending K013584

Device Name:

Excite Self Etch

Indications For Use:

Excite® Self Etch is a light cured adhesive designed to bond composite and compomer to enamel and dentin. It is also an adhesive for light initiated resin cements used in conjunction with "transparent" indirect restorations, i.e. all ceramic (except zirconiumoxide) and composite restorations.

Excite Self Etch is contraindicated for use as an adhesive with self-curing resin cements. Dual curing materials must be light initiated. This product is also contraindicated for zirconiumoxide ceramic restorations and for pulp capping.

Image /page/2/Picture/7 description: The image shows a close-up of a document with some text and markings. The text "Oct 30 12 14 PM '01" is visible, indicating a date and time stamp. The word "RECEIVED" is also present, suggesting that the document was received on the specified date. The image also contains some blurred markings or handwritten notes.

## (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

| Prescription Use<br>(Per 21 CFR 801.109) | <div style="text-align:left;">✓</div> |
|------------------------------------------|---------------------------------------|
|------------------------------------------|---------------------------------------|

OR

| Over-The-Counter Use | |
|----------------------|--|
|----------------------|--|

(Optional Format 1-2-96)
(Division Sign-Off)
Division of Dental, Infection Control,
and General Hospital Devices

| 510(k) Number | K013589 |
|---------------|---------|
|---------------|---------|